PCIe X16 GEN5 Riser Cable with GPU Vertical Mount Bracket PCIe 5.0 for Future RTX5090 (White Bracket V3)

It will need at least 6 slots' space to install this GPU vertical Mount bracket, before you order this Kit, It is recommended to check the space inside your PC case, it is also recommended to use Water-cooled radiator so as to avoid the vertically install GPU conflicts with the Air-cooled radiator.
Please also check if there are ribs between the PCIE slots at the back side of the case, those cases with ribs will block the DP/HDMI cable to plug onto GPU you may need to cut it off a little bit as shown in our picture.
Due to the smart mechanical design and the using of L shape steel, the bracket is strong enough to support current large and heavy GPU like RTX4090, RX7900XTX.
GEN 5 Riser Cables Built with 3M Low Loss Twinax cable
This PCIE GEN5 riser cable solution was originally developed to verify the GEN5 GPU, FPGA, acceleration card and RAID card development; on some specific system, this riser cable can support GEN5 data transmission with 1.2 meter length.
This cable supports Nvidia,, and all other gaming and professional GPU, without setting up the PCIE port to lower generation speed in BIOS. Excellent compatibility for GEN5, GEN4, GEN3 and even earlier versions.
GEN5 GPU to Verify Lanes and Transmission speed
Vertical GPU Installation Kit V2/V3
Vertical GPU Installation Kit V2/V3 Differences:
Vertical GPU Installation Kit V2/V3 Differences:
1The Vertical GPU Mounting Kit V3 comes with ARGB lighting effect.
2The vertical GPU installation kit V3 can be moved outward and
adjusted to the distance from the motherboard. V2 cannot be adjusted
Moving range: 13 ~17 cm
1. The V3 vertical mounting bracket is compatible with all current graphics cards on the market.
2. The V3 vertical mounting bracket is sturdy and aesthetically pleasing. It allows for adjusting the installation position of the graphics card and is compatible with ATX/MATX chassis.
Vertical GPU Installation Kit V2
It will need at least 7 slots' space to install this GPU vertical Mount bracket, before you order this Kit, It is recommended to check the space inside your PC case, it is also recommended to use Water-cooled radiator so as to avoid the vertically install GPU conflicts with the Air-cooled radiator.
Please also check if there are ribs between the PCIE slots at the back side of the case, those cases with ribs will block the DP/HDMI cable to plug onto GPU you may need to cut it off a little bit as shown in our picture.
Due to the smart mechanical design and the using of L shape steel, the bracket is strong enough to support current large and heavy GPU like RTX5090, RTX5080RTX5070RX9070XTRX7800XTXRX7900XTX.
The bracket is low visible.
The effect of ATX caseVertical GPU Installation Kit V2
The effect of ATX caseVertical GPU Installation Kit V3