Your Browsing History
- Free 30-day Returns
$106.99
Meet Your Seller
12V DC Smart Toilet Bidet Dual Solenoid Water Valve Manifold OE# ZNF-DC12V (ZNF-A), 0.5-8bar, 30ms Pulse Width, 3 Threaded Ports, Relay Control, Verify Pinout
- Specs from label & photos: Model printed on coil label: ZNF-A. Coil voltage: 12V DC. PulseWidth: 30ms. Working pressure: 0.5-8 bar. Assembly type: dual solenoid valve manifold (2 coils) on a white plastic body with 3 large male threaded ports plus additional small ports for internal hose routing. Wiring: red/black leads with plug connectors - match your connector/pinout and wire length. Primary OE/Part reference: ZNF-DC12V (confirm the same marking/spec on your original part). Use: smart toilet/bidet water control such as inlet/flush/nozzle spray including feminine wash (function depends on your unit's plumbing).
- Install/replace tips: turn off power and shut off the water supply, then relieve pressure. Photograph hose routing and wiring; match the 3 threaded ports and any small hose ports exactly to your original manifold orientation. Hand-start threads and avoid over-tightening plastic fittings. Replace worn washers/gaskets and clean any inlet filter/strainer if present.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Fitment (no brand/model claims): this item is sold by part/spec. Confirm fitment by your original parts markings and a physical match of the manifold shape, 3 threaded port layout, small hose ports, mounting points, and connector style.
Label on this unit shows: Model ZNF-A, Voltage 12V DC, PulseWidth 30ms, Pressure 0.5 -8 bar. If you are searching by OE# ZNF-DC12V, verify your old valve shows the same spec/structure before purchase. Not universal - do not substitute different voltage, different port/thread standard, or different wiring/connector.
Troubleshooting keywords (not a guaranteed fix): feminine wash/front wash no water, rear wash weak flow, intermittent spray, no fill/no flush, valve clicking/buzzing, leaking at threaded joints. Before replacing, check water pressure, kinked hoses, clogged filters/strainers, and verify stable 12VDC output from the control board/relay.
Helpful add-ons (sold separately): sealing washer/gasket set, inlet filter screen, hose clamps, and replacement water tubing matched to your toilet/bidet.
Label on this unit shows: Model ZNF-A, Voltage 12V DC, PulseWidth 30ms, Pressure 0.5 -8 bar. If you are searching by OE# ZNF-DC12V, verify your old valve shows the same spec/structure before purchase. Not universal - do not substitute different voltage, different port/thread standard, or different wiring/connector.
Troubleshooting keywords (not a guaranteed fix): feminine wash/front wash no water, rear wash weak flow, intermittent spray, no fill/no flush, valve clicking/buzzing, leaking at threaded joints. Before replacing, check water pressure, kinked hoses, clogged filters/strainers, and verify stable 12VDC output from the control board/relay.
Helpful add-ons (sold separately): sealing washer/gasket set, inlet filter screen, hose clamps, and replacement water tubing matched to your toilet/bidet.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Mipin Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...