Your Browsing History
Meet Your Seller
10G SFP+ to RJ45 Copper Transceiver, 10GBase-T Ethernet Module, CAT6a/7, Up to 30m, Plug & Play, Compatible with Cisco, Ubiquiti, TP-Link, Fortinet and More (2)
- Multi-Gigabit Speeds with Auto-Negotiation Supports 1G/2.5G/5G/10G Base-T with seamless auto-negotiation. Achieve high-speed copper connectivity using Cat6a/7 cables up to 30m, and legacy Cat5e for lower speeds up to 100m ideal for flexible, scalable deployments.
- Broad compatibility: Compatible with Cisco, Ubiquiti/Unif, Mikrotik, Fortinet, Netgear, D-Link, TP-Link, Meraki, and other devices that support 10G SFP+ Not compatible with HP/HPE switches.
- Plug-and-Play with Hot-Swap Design No drivers or setup required just insert the module into any SFP+ port. The hot-swappable design allows for easy upgrades or replacements without disrupting network uptime.
- Energy-Efficient with 2.5W Power Draw Optimized for performance and energy savings, this copper transceiver operates efficiently even under heavy network loads ideal for server rooms, enterprise routers, and edge deployments.
- Tested Reliability + 3-Year Warranty Each unit undergoes rigorous quality assurance for d
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
1, Both the remote device and the SFP+ port show no link lights
Most likely a compatibility issue
Check if your switch/router supports 10GBASE-T SFP+ modules
Some devices only support optical modules, not RJ45 ones
2,Remote device shows link light, but SFP+ port doesnt
Possible speed mismatch
Ensure the remote port supports 10Gbps
Use CAT6a or CAT7 cables, under 30 meters (max for 10GBASE-T)
3, SFP+ port link light is on, but no network connection
Not a compatibility issue likely a network configuration issue
Check VLAN settings, port status, or firewall rules
Confirm IP address settings and routing configuration
Troubleshooting Guide for 10GBASE-T RJ45 SFP+ Modules
Most likely a compatibility issue
Check if your switch/router supports 10GBASE-T SFP+ modules
Some devices only support optical modules, not RJ45 ones
2,Remote device shows link light, but SFP+ port doesnt
Possible speed mismatch
Ensure the remote port supports 10Gbps
Use CAT6a or CAT7 cables, under 30 meters (max for 10GBASE-T)
3, SFP+ port link light is on, but no network connection
Not a compatibility issue likely a network configuration issue
Check VLAN settings, port status, or firewall rules
Confirm IP address settings and routing configuration
Troubleshooting Guide for 10GBASE-T RJ45 SFP+ Modules
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by LEMITE Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...