here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Meet Your Seller
FTLX8574D3BCV-IT 10G SFP+ SR 850nm 300m Multi Mode Optical Transceiver
- High performance F T L X series transceiver engineered for reliable ten gigabit ethernet interconnects.
- Features an advanced eight hundred fifty nanometer V C S E L laser to deliver three hundred meter multi mode optical feeds safely.
- Constructed with premium zinc alloy metal housing and dust protected L C duplex ports to ensure limits.
- Standardized layout S F P plus hot pluggable gold finger contacts and bail latch mechanism support a snug setup.
- Ensure all primary switch optical ports and active fiber patch cords are isolated before setups.
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Technical Specification & Overview
--- TECHNICAL SPECIFICATIONS ---
Model / Component Interchange Industrial Identification: FTLX8574D3BCV-IT SFP+ Module
Product Type: 10GBASE-SR SFP+ Hot-Pluggable Optical Transceiver Module
Optical Wavelength & Fiber Mode: 850nm VCSEL Laser / Multi-Mode Fiber (MMF OM3 / OM4)
Maximum Transmission Distance Limit: Up to 300 Meters over OM3 Multi-Mode Optical Fiber
Data Rate Transfer Speed: 10.3125 Gbps High-Speed Duplex Transmission Line
Connector Interface Standard: Duplex LC Optical Receptacle Connector Header
Operating Temperature Grade: Industrial Temperature Range (-40°C to +85°C Operating Limit)
Application Field: Data Center Servers, Enterprise Switches, SAN Storage Networks, SFP+ Cards
--- TROUBLESHOOTING & INSTALLATION GUIDE ---
Q: Why does the newly installed FTLX8574D3BCV-IT 10G SFP+ transceiver show link down status, trigger high optical loss error alarms, or fail to auto-negotiate 10G speeds?
A: Link down status, optical loss, or negotiation failures are commonly caused by leaving protective dust plugs off LC ports (allowing ambient dust inside), using single-mode yellow optical patch cords instead of multi-mode orange/aqua cords, or unseated gold finger connectors. Safely isolate active optical switch ports, clean LC fiber ferrule tips with optical alcohol pens to secure a flush bypass-free hold, insert SFP+ modules until bail latches click tight, and check MMF cables.
Q: What optical power thresholds and static discharge limits must be strictly maintained for 10G SFP+ modules?
A: High-precision 10G SFP+ optical transceivers manage sensitive PIN photo-diode receivers and TOSA/ROSA optical sub-assemblies that inherently carry zero tolerance for static charge or dirty LC optical connectors. Never touch rear edge connector gold fingers with ungrounded bare hands or stare directly into 850nm laser ports. Keep spare transceivers stored inside sealed anti-static bags in dry compartments below fifty degrees Celsius to eliminate optical tracking failures across your data center networks.
--- TECHNICAL SPECIFICATIONS ---
Model / Component Interchange Industrial Identification: FTLX8574D3BCV-IT SFP+ Module
Product Type: 10GBASE-SR SFP+ Hot-Pluggable Optical Transceiver Module
Optical Wavelength & Fiber Mode: 850nm VCSEL Laser / Multi-Mode Fiber (MMF OM3 / OM4)
Maximum Transmission Distance Limit: Up to 300 Meters over OM3 Multi-Mode Optical Fiber
Data Rate Transfer Speed: 10.3125 Gbps High-Speed Duplex Transmission Line
Connector Interface Standard: Duplex LC Optical Receptacle Connector Header
Operating Temperature Grade: Industrial Temperature Range (-40°C to +85°C Operating Limit)
Application Field: Data Center Servers, Enterprise Switches, SAN Storage Networks, SFP+ Cards
--- TROUBLESHOOTING & INSTALLATION GUIDE ---
Q: Why does the newly installed FTLX8574D3BCV-IT 10G SFP+ transceiver show link down status, trigger high optical loss error alarms, or fail to auto-negotiate 10G speeds?
A: Link down status, optical loss, or negotiation failures are commonly caused by leaving protective dust plugs off LC ports (allowing ambient dust inside), using single-mode yellow optical patch cords instead of multi-mode orange/aqua cords, or unseated gold finger connectors. Safely isolate active optical switch ports, clean LC fiber ferrule tips with optical alcohol pens to secure a flush bypass-free hold, insert SFP+ modules until bail latches click tight, and check MMF cables.
Q: What optical power thresholds and static discharge limits must be strictly maintained for 10G SFP+ modules?
A: High-precision 10G SFP+ optical transceivers manage sensitive PIN photo-diode receivers and TOSA/ROSA optical sub-assemblies that inherently carry zero tolerance for static charge or dirty LC optical connectors. Never touch rear edge connector gold fingers with ungrounded bare hands or stare directly into 850nm laser ports. Keep spare transceivers stored inside sealed anti-static bags in dry compartments below fifty degrees Celsius to eliminate optical tracking failures across your data center networks.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by PartsPro Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...