Gigabit PoE Switch, 2 Port Gigabit Ethernet Switch, Ethernet Splitter, Non-PoE to PoE Adapter, Network Hub 1 in 2 Out, Supplies POE (15.4W) or PoE+ (30W), Plug & Play, Distance Up to 328 Ft.

Ethernet Splitter 1 to 2This product is a Gigabit network distributor with a 1-to-2 port expansion function and integrated POE (Power over Ethernet) power supply function. The device allows users to simultaneously expand two Gigabit network ports through one Gigabit network port and provide a POE power supply for the devices connected to these two ports. In the absence of POE network input, the device supports an external power adapter to provide power for the connected devices and Convert Non-PoE to PoE. (Note: Power adapter is not included)
802.3at/af PoE Compliant Supplies power and data via one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets. Easy setup with no software installation or configuration needed. Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas. (Note: Please use Cat5e or higher cables.)
AI PD DetectionWith Auto Detect technology, delivers up to 30W to a PoE+ device with backwards compatibility for 802.3af PoE (15.4W). If it is a non-poe device that does not need a power supply, the switch will not supply power to these devices and will not damage the device. POE power supply: built-in POE power supply module, which can provide power and data transmission for connected devices.

Experience the CLOSS difference—where technology connects, and you thrive.

PoE Splitter 1 in 2 out
2 Port Gigabit PoE Splitter for Cat5e/6/7/8 Cable
PoE Splitter 1 in 3 out
3 Port Gigabit PoE Splitter for Cat5e/6/7/8 Cable
PoE Splitter 1 in 4 out
4 Port Gigabit PoE Splitter for Cat5e/6/7/8 Cable
Gigabit PoE Switch
Ethernet Adapter

802.3at/af Gigabit POE Switch

2-Port gigabit PoE switch is a cost-effective network expansion device with PoE extension features to deliver stable network performance. The switch is compatible with IEEE 802.3af/at PoE standard, up to 30W per port can provide a total power output of 30W to connect more IP cameras or APs.

Working principle: This device is based on POE power supply technology and supports two power supply modes:

Mode 1: Standard PoE/PoE+ Power

• Compatible with all IEEE 802.3af/at PoE switches

• Draws power directly through Ethernet cable (Cat5e or higher recommended)

• No external power adapter required

• Supports maximum PoE+ power budget (30W)

Mode 2: Standalone DC Mode (For Non-PoE Networks)

• Built-in DC jack for non-PoE environments

• Requires 48V DC power adapter (not included)

• Current Rating: Minimum 1A recommended

• Standard 5.5×2.1mm center-positive connector

Important Notes:

Why 48V Recommended?

• Ensures compatibility with all PoE standards

• Provides stable power for connected devices

• Maximizes power delivery efficiency

Distance up to 100m

Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas.

Smart PoE+

Compatible with IEEE802.3af/at PoE standards, the switch can provide a total power output of 30W, up to 30W per port, and automatically detect PoE devices.

Gigabit PoE Switch

Lightning Protection

There are specialized surge protection units for the PoE switches which helps in cutting the supply off.

Gigabit PoE Switch

Full Gigabit Ports

The switch supports speeds ranging from 10Mbps to 1Gbps. your network devices can run at their designated speeds without any limitations.

Gigabit Ethernet (1Gbps) speeds require Category 6 cabling.

Gigabit PoE Switch

Plug and Play

Unmanaged gigabit PoE switch, no configuration required. Simply plug a device into the network. It automation begins.