Digital Watchdog DWC-MTTWM Wall Mount for Fixed Lens Turret Cameras

The Digital Watchdog DWC-MTTWM is a wall mount for fixed-lens turret cameras, suited to security installers and system owners mounting a compatible camera on a wall.

Recommended For

• Security installers mounting a compatible fixed-lens turret camera or vandal dome on a wall; the kit includes a mounting template, anchors, camera screws, and a hex wrench.
• Facility teams positioning a compatible fixed-lens camera for wall-based indoor or outdoor surveillance, with the camera angle adjusted during installation.
• Installers seeking a dedicated wall bracket for select Digital Watchdog fixed-lens turret or vandal-dome cameras, rather than a universal camera mount.

Real-World Use Scenarios

• At an exterior entrance or side door, mount a compatible fixed-lens turret camera on the wall and aim it toward the approach; the bracket provides a dedicated wall position for monitoring that area. Confirm the camera itself is outdoor-rated.
• For an indoor hallway or room, use the mount to place a compatible turret camera on a wall rather than a ceiling; the camera can then be adjusted to frame the area being monitored.
• When adding a camera where wiring reaches the wall, pass the wires through during installation and connect them before fastening the camera to the bracket; this supports a direct wall-mounted setup without treating the mount as a separate junction box.
• During a new installation, use the included template to mark the wall holes before drilling, then secure the mount to the surface; this helps position the camera mount where the planned view is needed.
• After attaching the camera, adjust its position and angle, then tighten the lock screw to keep the selected view in place; this is useful when final framing needs small changes during setup.

Spec Summary