Your Browsing History
Meet Your Seller
ESP32-S3 Mini Development Board with Pre-Soldered Header, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz W-i-F-i & Blue-Too-th 5, Onboard 4MB Flash Memory/2MB PSRAM
Limited time offer, ends 08/30 By TechDen
- ESP32-S3 Mini Development Board with Pre-Soldered Header, Based on ESP32-S3FH4R2 Dual-Core Processor. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz W-i-F-i (802.11 b/g/n) and Blue-too-th 5 (LE). Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
- Integrated with USB serial port full-speed controller, 24 × GPIO pins allows flexibly configuring pin functions. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc.
- Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
ESP32-S3 Mini Development Board with Pre-Soldered Header, Based on ESP32-S3FH4R2 Dual-Core Processor. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GH z W-i-F-i ( 802.11 b/g/n) and Blue-too-th 5 (LE). Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Integrated with USB serial port full-speed controller, 24 × GPIO pins allows flexibly configuring pin functions. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc.
Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
Supports 2.4GH z W-i-F-i ( 802.11 b/g/n) and Blue-too-th 5 (LE). Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Integrated with USB serial port full-speed controller, 24 × GPIO pins allows flexibly configuring pin functions. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc.
Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 45 days
- Return for replacement within: 30 days
- This item is covered by TechDen Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...