Your Browsing History
Meet Your Seller
ESP32-S3 2.8inch Touch Display Development Board, Onboard 2.8inch Touch IPS LCD 480×640, 32-bit LX7 Dual-Core Processor, Supports W-F-i & Blue-Too-th, ESP32 with Display
- ESP32-S3 With 2.8inch Display Development Board, equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard 2.8inch touch LCD display, 480×640 resolution.
- Supports 2.4GHz W-i-F--i (802.11 b/g/n) and Blue-too--th 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM.
- Supports touch control via I2C interface, with interrupt support (for touch versin only). Adapting UART, I2C and some IO interfaces, integrates full-speed USB port.
- Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
- Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
ESP32-S3 With 2.8 inch Display Development Board, equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard 2.8 inch touch LCD display, 480×640 resolution.
Supports 2.4GH z W-i-F--i ( 802.11 b/g/n) and Blue-too--th 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM.
Supports touch control via I2C interface, with interrupt support (for touch versin only). Adapting UART, I2C and some IO interfaces, integrates full-speed USB port.
Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Supports 2.4GH z W-i-F--i ( 802.11 b/g/n) and Blue-too--th 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM.
Supports touch control via I2C interface, with interrupt support (for touch versin only). Adapting UART, I2C and some IO interfaces, integrates full-speed USB port.
Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 45 days
- Return for replacement within: 30 days
- This item is covered by TechDen Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...