Lian-Li Edge Hub V2 USB 3.0 & PWM Fan Hub - Black

- EDGE HUB V2 INNOVATIVE EXTERNAL USB & FAN HUB

EDGE HUB V2 streamlines fan and USB management with dual-hub architecture, six PWM fan ports, and eight USB connections, Flexible installation and seamless L-Connect 3 monitoring bring refined control to any build.

- EDGE HUB VS. EDGE HUB V2: KEY DIFFERENCES

EDGE Hub V2 upgrades both hardware architecture and software management, introducing dual-hub signal distribution, higher USB device hierarchy, expanded installation flexibility, and USB monitoring through L-Connect

- DUAL CHIP HUB ARCHITECTURE

EDGE Hub V2 replaces the previous versions single hub chip with two parallel 1-to-4 hub chips, distributing connected USB devices across two paths for more balanced device management and improved system flexibility. Ideal for LCD products and other USB devices, it delivers more stable connectivity for complex setups.

- RELIABLE USB HIERARCHY

EDGE Hub V2 connects directly to the motherboards USB 3.0 header while utilizing its USB 2.0 signal path, positioning the hub higher in the USB device tree to reduce hub layers and provide more reliable connectivity for multiple USB-controlled devices.

- 6 x 2A PWM FAN PORTS

Six 4-pin PWM fan connectors, each rated up to 2A, centralize fan connectivity and control for high-density multi-fan setups.

- MAXIMIZED USB EXPANSION

Four physical USB ports can each carry two USB signals through a 1-to-2 splitter cable, offering flexible signal routing and configuration for different internal USB setups.

- FLEXIBLE POWER OPTIONS

Connect EDGE Hub V2 directly to an EDGE or RS Series PSU, or power it independently via a PCIe 8-pin cable for use with any PSU.

- SEAMLESS MAGNETIC IN-CHASSIS MOUNTING

Integrated magnets enable flexible in-chassis placement, while direct power connectivity with any EDGE Series or RS PSU streamlines installation for cleaner routing and greater build flexibility.

- ENHANCED SOFTWARE INTEGRATION WITH L-CONNECT 3

EDGE Hub V2 brings L-Connect 3 integration to USB management, providing real-time visibility into USB traffic and connected devices. Monitor one-hour cumulative transfer rates to identify heavily loaded ports and redistribute devices for balanced bandwidth usage. View overall hub utilization to determine when additional USB capacity may be needed, while customizable port names make it easy to identify connected devices without tracing cables or opening the case.

- PER-PORT TRANSFER MONITORING

Monitor each USB ports current transfer rate and accumulated data transfer over a one-hour period, making it easier to identify high-load devices and redistribute connections for more balanced bandwidth usage.

- TOTAL HUB UTILIZATION

The MB Signal Port displays the hubs upstream transfer activity, while port utilization provides an overview of the hubs total bandwidth usage. Users can reference this data to evaluate the current USB load and adjust device connections or system setup as needed.

- OVERLOAD ALERTS

Built-in high-load notifications help identify excessive USB traffic before it affects connected devices, allowing users to move high-load devices to another port and better balance the hub.

- CUSTOM PORT NAMING

Each USB port can be renamed according to the connected device, making controllers, LCDs, AlOs, and other components easy to identify directly in L-Connect 3 without opening the case to trace connections.