1000mm PCIe 3.0 x16 GPU Riser Cable, 180 Degree Straight

1 METER WITH STRAIGHT CONNECTOR A full meter of reach plus a 180-degree straight female connector: the cable exits in line with the card for long runs on test benches, wall-mounted rigs and channel-routed builds.; FULL PCIE 3.0 x16 BANDWIDTH Delivers up to 16GB/s in a PCIe 3.0 x16 slot; backward compatible with PCIe 2.0 and 1.0 slots. No drivers, no BIOS settings needed for Gen3 GPUs, no external power required.; EMI-SHIELDED FOR A STABLE SIGNAL The shielded ribbon design blocks interference along the whole run, keeping 4K output and sustained frame rates stable in gaming and workstation use.; BUILT FOR GEN3 GPUS Full speed with GeForce RTX 20 / GTX 16 / GTX 10 and Radeon RX 5000 / VII / Vega / R9 Fury series. Using a PCIe 4.0 GPU? Set the motherboard slot to Gen 3.0 mode in BIOS first, or choose our PCIe 4.0 family riser cable.; EASY INSTALL, LIFETIME SUPPORT Slide-on installation with no drivers (hot swapping not supported). Ships in an anti-static bag avoid touching the gold fingers. Backed by GLOTRENDS lifetime tech support and a length-selection guide.