Ethernet Extender Kit Tupavco TEX-100 Over Phone Line or CAT5/CAT6 Cable Range up to 7000ft (Pair of 2pc) LAN Network Extension over Twisted Copper Wire or RJ45 -VDSL Broadband Repeater Booster Bridge

4 dip switches on the front panel:
SNR noise margin - 6 dB for especially good connections, or 9 dB to not cut out signal on suboptimal connections
SYM/ASYM - Symmetric mode is optimal for VoIP networks, asymmetric mode where upload bandwidth can be sacrificed for download speed
30a/17a - Chooses the frequency band for operation (30a is high-speed mode, 17a is long-reach mode)
OT/RT - Chooses role of device, each device should be set to opposite role (OT is CE or sender, RT is CPE or receiver)

How do I troubleshoot my connection? How do I know what's wrong with it
It's always a good idea to do a setup in a test environment, connecting devices with a short cable, connecting the sender to the signal source and the receiver to a laptop to verify that the parameters are right and that the laptop has a connection
My connection is still not working (Troubleshoot part 2)
Connect receiver w/ the long cable to see if they are faulty. Then, narrow down and test possible faults, individually with every device in your Ethernet network, replacing the simple network configuration with your real network devices one at a time
Is it wireless? Can I use phone lines to connect the two devices?
The device only extends the connection, and does not transmit it wirelessly. The sender and receiver still need to be connected. Yes, you can use phone lines to connect the two devices, the VDSL ports on the devices are compatible with phone cables.
How to power the device? Can it be powered with PoE
The device can be powered via PoE, but it cannot transmit the PoE power downstream
How do install the device?
There is a quick installation manual in the packaging of each device, which you can use to troubleshoot installation. It is also available as a PDF on the product photos page, and includes the function of every component of the device.
Bandwidth100 mbpsCommunication ModeHalf Duplex & Full Duplex supported, indicated by LED lightsData Rate IndicatorsLED indicators for 10/100 mbps ratesBandwidth frequency17a or 30a frequency profiles for VDSL2DSLAM Compatibility724M/708M DSLAM compatability + most of 3rd party DSLAMsReachUp to 7000ft / 2000mSNR MarginCan be set to 6 dB or 9 dB depending on useCommunication modeCan be set to either symmetric or asymmetric depending on use Dip switches easily set the device to ideal settings for your network needs How do I troubleshoot my connection? How do I know what's wrong with it
My connection is still not working (Troubleshoot part 2)
Is it wireless? Can I use phone lines to connect the two devices?
How to power the device? Can it be powered with PoE
How do install the device?
Tupavco TEX-100 Technical Specifications