Wireless WiFi Signal Booster 4000mW 2.4GHz 36dBm Wireless Signal Amplifier Repeater Extender Dual chip, for Hotel, Supermarkets, Factory, IP Cameras, Smart Home Systems

Features:
2.4GHz, Max. 4000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Small size, Safe & Power saving;
Full kit, easy to install;
For house, office, IP cameras, supermarkets....
[Maximum Output Power of 4000mW]
SH24Gi4000 2.4GHz WiFi Signal Booster is 36dBm 4W WiFi Amplifier, offering maximum output power of 4W at ideal situation. Input power range is 0~20dBm, suggested to be 15~19dB for better signal amplifying performance. Add a suitable length of cable or attenuator between wifi device's output with the wifi booster, if the output signal power is over 20dBm. (Note that longer RF cable connection will cause greater signal attenuation).
[Application of 2.4GHz 4W WiFi Booster]
SH24Gi4000 2.4GHz WiFi Signal Booster Repeater is compatible with various types of 2.4Ghz wireless device, enhancing transmit power/ WiFi Signal range for Drone, AP router, Bluetooth, ZigBee, security camera system.
SH24Gi4000 2.4GHz WiFi Signal Booster can extend WiFi Signal Range, enhancing WiFi Transmit/ Output power of 2.4GHz Wireless Device, enjoying better 2.4G WiFi Signal at use.
Made of Aluminum-alloy case by CNC, anti-interference, IEEE802.11b/g/n standards, compatible with variety of 2.4GHz frequency transmitter and receiver wireless network devices. Easy installation, simply plug and play, no software is required.
SH24Gi4000 2.4GHz WiFi Signal Booster is 36dBm 4W WiFi Amplifier, offering maximum output power of 4W at ideal situation. Input power range is 0~20dBm, Transmit gain 17dB~20dB can greatly improve WiFi signal range.
Specifications:
Operating range : 2.4~2.4836GHz
Channel width: 20Mhz&40Mhz
Supported standards: IEEE 802.11b/g/n
Operation mode: Bi-directional, half-duplex, time division duplex
Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)
Output power: 4000mW (36dBm)
Input power: 0 ~ 20dBm
Transmit gain: 17 - 20dB
Receiver gain: 12dB
Noise figure: 3.5dB typical
Frequency response: ±2dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°C to +70°C
Operating humidity: Up to 75% relative humidity
Material: Cast aluminum
LED light: Power status /activity status LED
Booster size and weight: 9.7 x 6.4 x 1.7cm; 140g
Package size and weight: 21 x 15 x 6cm; 470g
Use
Step 01: Remove the Antenna from the Wireless Router (Access Point).
Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V 2A.
Package contents:
1 x SH24Gi4000 wifi singal booster
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x Power supply
1 x English user manual
Attention:
The power amplifier is not suitable for use in high power devices.
SH24Gi4000 wifi singal booster; RG316 cable with SMA connectors (20cm); 6dBi omni antenna; Power supply; English user manual
Page 11Page 1 of 1Previous pageNext pageSunhans Wireless WiFi Signal Booster 4000mW 2.4GHz 36dBm Wireless Signal Amplifier Repeater Extender Dual chip, for Hotel, Supermarkets, Factory, IP Cameras, Smart Home Systems
Share:
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.
Fields with an asterisk * are required
**