Your Browsing History
Meet Your Seller
Rear View Backup Camera fits Edge 2011-2015, MKX 2011-13 | HD 160° Wide Angle&1080P High Resolution&IP68 Waterproof Safety Parking Assist Camera Replace FL1T-19G490-AC BT4Z-19G490-B
- Part Number: FL1T-19G490-AC; BT4Z-19G490-B; FL1T 19G490 AC; BT4Z 19G490 B. This rear view camera is suitable for Edge 2011 2012 2013 2014 2015 and MKX 2011 2012 2013. Nighttime Imaging Algorithm: Equipped with a low-light sensor and an automatic nighttime imaging algorithm, this in-car camera instantly adapts to pitch-black environments, projecting a high-definition rearview image onto your display. By reducing dangerous blind spots at night and clearly revealing hidden obstacles where standard factory cameras fail, it gives you confidence and peace of mind when reversing, parking, or navigating in dimly lit garages and dark alleyways. DIY Installation, Simple Setup: Prepare tools and connect the pull rope. Use a Torx tool to unscrew the hex socket head cap screws on the inner cover plate of the rear panel, then remove the old camera mounting screws. Locate the old cable connector at the spare tire position under the vehicle and disconnect it using moderate force. Finally, use the pull rope to thread the new cable through the rear panel and install the new camera. High-Quality Materials, Durable and Long-Lasting: With an IP68 waterproof rating, it can withstand heavy rain and high-pressure car washes, reducing the risk of water ingress failures. The housing is made of ABS plastic, which is impact-resistant and resistant to aging. It operates within a temperature range of -40°C to 80°C, ensuring stable performance and long-lasting durability in both extreme cold and
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Part Number: FL1T-19G490-AC; BT4Z-19G490-B; FL1T 19G490 AC; BT4Z 19G490 B. This rear view camera is suitable for Edge 2011 2012 2013 2014 2015 and MKX 2011 2012
2013.
Nighttime Imaging Algorithm: Equipped with a low-light sensor and an automatic nighttime imaging algorithm, this in-car camera instantly adapts to pitch-black environments, projecting a high-definition rearview image onto your display. By reducing dangerous blind spots at night and clearly revealing hidden obstacles where standard factory cameras fail, it gives you confidence and peace of mind when reversing, parking, or navigating in dimly lit garages and dark alleyways. DIY Installation, Simple
Setup: Prepare tools and connect the pull rope. Use a Torx tool to unscrew the hex socket head cap screws on the inner cover plate of the rear panel, then remove the old camera mounting screws. Locate the old cable connector at the spare tire position under the vehicle and disconnect it using moderate force. Finally, use the pull rope to thread the new cable through the rear panel and install the new camera. High-Quality Materials, Durable and
Long-Lasting: With an IP68 waterproof rating, it can withstand heavy rain and high-pressure car washes, reducing the risk of water ingress failures. The housing is made of ABS plastic, which is impact-resistant and resistant to aging. It operates within a temperature range of -40°C to 80°C, ensuring stable performance and long-lasting durability in both extreme cold and heat.
Detailed Parameters: High
Resolution: 1280*720, High
Waterproof grade: IP67, Wide
Viewing angle: 170°, High-definition
pixels: 1080P, Working
voltage: 6v-12v, clear guide lines, Operating
temperature: -40~80,
Video Output: CVBS
2013.
Nighttime Imaging Algorithm: Equipped with a low-light sensor and an automatic nighttime imaging algorithm, this in-car camera instantly adapts to pitch-black environments, projecting a high-definition rearview image onto your display. By reducing dangerous blind spots at night and clearly revealing hidden obstacles where standard factory cameras fail, it gives you confidence and peace of mind when reversing, parking, or navigating in dimly lit garages and dark alleyways. DIY Installation, Simple
Setup: Prepare tools and connect the pull rope. Use a Torx tool to unscrew the hex socket head cap screws on the inner cover plate of the rear panel, then remove the old camera mounting screws. Locate the old cable connector at the spare tire position under the vehicle and disconnect it using moderate force. Finally, use the pull rope to thread the new cable through the rear panel and install the new camera. High-Quality Materials, Durable and
Long-Lasting: With an IP68 waterproof rating, it can withstand heavy rain and high-pressure car washes, reducing the risk of water ingress failures. The housing is made of ABS plastic, which is impact-resistant and resistant to aging. It operates within a temperature range of -40°C to 80°C, ensuring stable performance and long-lasting durability in both extreme cold and heat.
Detailed Parameters: High
Resolution: 1280*720, High
Waterproof grade: IP67, Wide
Viewing angle: 170°, High-definition
pixels: 1080P, Working
voltage: 6v-12v, clear guide lines, Operating
temperature: -40~80,
Video Output: CVBS
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Muxiju Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















