Your Browsing History
Meet Your Seller
Atom P60 2-Channel ATV Car Amplifier with RWK4CU Wiring Kit | 4800W Peak / 1200W RMS Bridged, 2-Ohm Stable, HPF/LPF, Bass EQ, Voltage Meter, 4 AWG OFC Installation Kit, 2-Items
- Package Includes: (1) ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter and (1) RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC. High Power Class-D Amplifier Performance: The ATOM P60 provides 1200W RMS (600W x 2 @ 2 or 1200W x 1 bridged @ 4, <1% THD+N @ 14.4V) with a broad 10Hz-30kHz response for deep bass and crisp highs. A digital voltage display aids in monitoring system voltage, while a high-speed MOSFET supply and 8V preamp circuitry maintain loud, steady output. It uses three 40A ATC fuses and a compact 12.4" x 6.7" x 2.0" chassis for tight installations. Weather Resistant Build For Powersports And Marine: The ATOM P60 features a conformal coated, sealed PCB board and a rustproof aluminum heat sink with stainless steel end panels, screws, and hardware. The bottom plate is also aluminum and will not corrode. This sturdy design helps shield the amplifier against moisture, humidity, and vibration in cars, trucks, UTVs, ATVs, and marine installs, so your power remains consistent season after season on the road or trail. Full Control And Flexible Tuning: Each ATOM P60 channel includes adjustable low pass and high pass filters from 50Hz to 250Hz plus a fully adjustable 12dB bass equalizer, so you can tune subs, mids, or full range speakers without an external crossover. All channels are bridgeable, and the amp features mute and delay soft start, under/over voltage protection, clipping limiter style protection, and status LEDs to
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Package Includes: (1) ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter and (1) RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC. High Power Class-D
Amplifier Performance: The ATOM P60 provides 1200W RMS (600W x 2 @ 2 or 1200W x 1 bridged @ 4, <1% THD+N @ 14.4V ) with a broad 10Hz-30kHz response for deep bass and crisp highs. A digital voltage display aids in monitoring system voltage, while a high-speed MOSFET supply and 8V preamp circuitry maintain loud, steady output. It uses three 40A ATC fuses and a compact 12.4" x 6.7" x 2.0" chassis for tight installations. Weather Resistant Build For Powersports And Marine: The ATOM P60 features a conformal coated, sealed PCB board and a rustproof aluminum heat sink with stainless steel end panels, screws, and hardware. The bottom plate is also aluminum and will not corrode. This sturdy design helps shield the amplifier against moisture, humidity, and vibration in cars, trucks, UTVs, ATVs, and marine installs, so your power remains consistent season after season on the road or trail.
Full Control And Flexible Tuning: Each ATOM P60 channel includes adjustable low pass and high pass filters from 50Hz to 250Hz plus a fully adjustable 12dB bass equalizer, so you can tune subs, mids, or full range speakers without an external crossover. All channels are bridgeable, and the amp features mute and delay soft start, under/over voltage protection, clipping limiter style protection, and status LEDs to keep your system safe while it slams. True 100%
Copper Wiring Kit Included: The RWK4CU uses 4 AWG OFC power and ground cable with a SuperFlex jacket for maximum current transfer. It contains 17 ft 4-ga power, 3 ft 4-ga ground, 17 ft 18-ga remote lead, 25 ft 14-ga flat speaker wire, and 17 ft triple-shielded RCA cables. A gold-plated Mini ANL holder with 120A fuse, ring/spade terminals, and zip ties are included. The 1862-strand copper design supports 1000-2000W RMS systems
Amplifier Performance: The ATOM P60 provides 1200W RMS (600W x 2 @ 2 or 1200W x 1 bridged @ 4, <1% THD+N @ 14.4V ) with a broad 10Hz-30kHz response for deep bass and crisp highs. A digital voltage display aids in monitoring system voltage, while a high-speed MOSFET supply and 8V preamp circuitry maintain loud, steady output. It uses three 40A ATC fuses and a compact 12.4" x 6.7" x 2.0" chassis for tight installations. Weather Resistant Build For Powersports And Marine: The ATOM P60 features a conformal coated, sealed PCB board and a rustproof aluminum heat sink with stainless steel end panels, screws, and hardware. The bottom plate is also aluminum and will not corrode. This sturdy design helps shield the amplifier against moisture, humidity, and vibration in cars, trucks, UTVs, ATVs, and marine installs, so your power remains consistent season after season on the road or trail.
Full Control And Flexible Tuning: Each ATOM P60 channel includes adjustable low pass and high pass filters from 50Hz to 250Hz plus a fully adjustable 12dB bass equalizer, so you can tune subs, mids, or full range speakers without an external crossover. All channels are bridgeable, and the amp features mute and delay soft start, under/over voltage protection, clipping limiter style protection, and status LEDs to keep your system safe while it slams. True 100%
Copper Wiring Kit Included: The RWK4CU uses 4 AWG OFC power and ground cable with a SuperFlex jacket for maximum current transfer. It contains 17 ft 4-ga power, 3 ft 4-ga ground, 17 ft 18-ga remote lead, 25 ft 14-ga flat speaker wire, and 17 ft triple-shielded RCA cables. A gold-plated Mini ANL holder with 120A fuse, ring/spade terminals, and zip ties are included. The 1862-strand copper design supports 1000-2000W RMS systems
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Myriad Mart Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...