Your Browsing History
Meet Your Seller
45KM104 10" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM10 Bundle with Rockville RXM-T1 1500 Watt Peak Marine/Boat 2 Channel Amplifier Stereo Amp
Limited time offer, ends 09/07 By Myriad Mart
- Injection-Molded Polypropylene Cone. Co-Molded Santoprene Surround. UniPlate Back Plate and Pole Piece. Thick Tinsel Leads. Large Ceramic Magnet. Rear Gasket Included. Polymer Basket Resists Corrosion. Protective Terminal Cap. Stainless Mounting Hardware Included. Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure. Frequency Response: 30 Hz - 500 Hz. Impedance: 4 Ohms. Mounting Depth: 5" inches. Hole Diameter: 9 3/16". Sealed Enclosure Volume Min-Max: 1-2.4 cubic feet. Features: Rockville RXM-T1 1500 Watt Peak / 750 Watt RMS Marine 2 Channel Amplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings: 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Injection-Molded Polypropylene Cone. Co-Molded Santoprene Surround. UniPlate Back Plate and Pole Piece. Thick Tinsel Leads. Large Ceramic Magnet. Rear Gasket Included. Polymer Basket Resists Corrosion. Protective Terminal Cap. Stainless Mounting Hardware Included. Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure.
Frequency Response: 30 Hz - 500 Hz.
Impedance: 4 Ohms.
Mounting Depth: 5" inches.
Hole Diameter: 9 3/16".
Sealed Enclosure Volume Min-Max: 1- 2.4 cubic feet.
Features: Rockville RXM-T1 1500 Watt Peak / 750 Watt RMS Marine 2 Channel Amplifier.
CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings: 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse.
Dimensions: (W x H x L) 8.6" x 2" x 13". The KM 10-inch Marine Subwoofer creates its own waves in a sealed or ported enclosure. Built to handle the power and the weather, this sub is custom made to perform on your boat. Packed with features and designed specifically for marine use, it delivers the deep, loud bass your boat needs
Frequency Response: 30 Hz - 500 Hz.
Impedance: 4 Ohms.
Mounting Depth: 5" inches.
Hole Diameter: 9 3/16".
Sealed Enclosure Volume Min-Max: 1- 2.4 cubic feet.
Features: Rockville RXM-T1 1500 Watt Peak / 750 Watt RMS Marine 2 Channel Amplifier.
CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings: 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse.
Dimensions: (W x H x L) 8.6" x 2" x 13". The KM 10-inch Marine Subwoofer creates its own waves in a sealed or ported enclosure. Built to handle the power and the weather, this sub is custom made to perform on your boat. Packed with features and designed specifically for marine use, it delivers the deep, loud bass your boat needs
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Myriad Mart Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...