PATA IDE to USB 2.0 Adapter Date Cable for 2.5/3.5 Hard Disk Drive DVD Converter Cable Line

Features:

The USB interface connected to the 2.5 and 3.5 inch IDE and hard disk interface 

USB2.0 TO IDE/ high-speed connection

USB2.0 high speed transmission, stable performance

Support CR cd-rom, DVD, cd-rom, CD - RW, DVD RW 

Support system: Windows 2000, me, XP, Vista and Mac OS 

Under Windows 2000 / ME/XP/Vista, don't need The drive

the solidification structure, stable performance

USB transfer IDE/ conversion line

conversion head integration 2.5 inch, 3.5 inch and 5.25 inch, type hard disk (below 320 g), cd-rom (The recorder)

support hot plug, plug and play

can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer thereof

good compatibility, can realize data exchange across the hardware platform

transfer rate quickly, the transfer rate of up to 480 MB/s

Specifications:

USB Cable Length: 62cm/24.41in. 

4 Pin power cable Length: 17.5cm/6.89in. 

cable Length: 36cm/14.17in.

Using Information:

1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using. 

there is no power cord and other accessories)

2. the connection order

1) first connect the power cord line to 220v mains. 

2) connect the power adapter to the power cord end (so as not to spark phenom caused by the electric current is too large, a few may be burned power adapter). 

3) connect the USB cable to your PC, and power on the hard disk box, can exchange data after the computer identify USB device a few minutes later.

C. hard disk box removal

Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.

Notice: