B+M Key Socket 2 M.2 NGFF (SATA) SSD to 2.5 SATA Adapter Card with Case New

Material: plastic.
Color: as shown in pic
Warning:
This product only support socket2 (Gen2) B+M key SATA M. 2 NGFF SSD, it can not support socket2 (Gen2) B+M key PCIe x2 M. 2 NGFF SSD and socket3 (Gen3) M key PCIe x4 M. 2 NGFF SSD, please confirm that your SSD is fit.
This product only support socket2 (Gen2) B+M key SATA M. 2 NGFF SSD, it can not support socket2 (Gen2) B+M key PCIe x2 M. 2 NGFF SSD and socket3 (Gen3) M key PCIe x4 M. 2 NGFF SSD, please confirm that your SSD is fit.
Features:
1.2. 5" SATA to Soket2 B+M key SATA M. 2 NGFF SSD adapter card.
2. The speed and other properties is not changed, only form conversion interface.
3. Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of SATA M. 2 NGFF SSD.
4. You can connect it to desktop or laptop.
5. Transparent to the operating system and does not require any software drivers.
Specification:
1.
Size: 10 cm*7 cm* 0.7 cm.
2.
Iterfation: M. 2 NGFF to 2.5" SATA
There are three kinds of M. 2 NGFF SSD, please
pay attention to identify:

1. Socket2 (Gen2) B+M key SATA M. 2 NGFF SSD (such as THNSNH128G8NT/ THNSNH128GDNT/MZNTD256HAGM etc models of SSD)

2. Socket2 (Gen2) B+M key PCIe x2 M. 2 NGFF SSD (such as PX-AG128M6E PX-AG256M6E PX-AG512M6E SD6PP4M-128G SD6PP4M-256G HFS256GA6MND HFS512GA6MND HFS128GB9MND HFS256GB9MND HFS512GB9MND LGT-256B1P LGT-512B1P CX1-JB128 CX1-JB256 CX1-JB512 PT42 APP064G3FA-ATMTHNSNN128GSX7 THNSNN256GSX7 THNSNN128GVX7 THNSNN256GVX7 etc models of SSD), it there are two gaps at the hard disk interface part.

3. Socket3 (Gen3) M key PCIe x4 M. 2 NGFF SSD, such as XP941 (MZHPU128HCGM MZHPU512HCGL MZHPU256HCGL), SM951 PCIE-AHCI (MZHPV128HDGM MZHPV256HDGL MZHPV512HDGL), SM951 PCIE-NVME ( MZVPV128HDGM MZVPV256HDGL MZVPV512HDGL), PM951 PCIE-NVME ( MZFLV128HCGR MZFLV256HCHP MZFLV512HCJH MZVLV1Y0HCJH), PM961 (MZFLW1T0HMLH). 950 PRO (MZVKV256 MZVKV512), SM961 (MZVPW128HEGM MZVPW256HEGL MZVPW512HEGL), SH2280S3 SHPM2280P2 THNSN5128GPU7 THNSN5128GPU7 THNSN5256GPU7 THNSN5512GPU7 THNSN51T02DU7 etc models of SSD. it there are one gap at the hard disk interface part.
Product does not work troubleshooting:
A). Please confirm interface definition is correct of your hard disk, new SSD if there is no partition, open the "my computer" can't see the ssd, please use the Disk Manager in Windows to delete the partitions or to create a new partition on the SSD.
B). Please make sure your hard drive can work normally in the original equipment, cancel the all the password set, especially the BIOS disk encryption password.
C). Upgrade computer BIOS to the latest version, revert to the default Settings.
D). Note the boot mode Settings, UFEI or Legacy.
E). You can connection USB port or connection SATA port of your computer to test this product, please change another test method if it can't work normally, it would exclude compatibility issues.
F). Please replace the SSD or computer test, because some computers not compatible with the specific model or a specific brand solid-state drives.
G). If the BIOS can detect hard disk, you can to partition normal formatting of hard disk, you can install system files, but can't normal into the operating system after installation, this because lack of he master boot record. you can rebuild the master boot record or use CD-ROM installation system, at the same time to partition for the hard disk.