Your Browsing History
Meet Your Seller
Visit EmpressTech Store
FOLLOW
4Pcs AD828 Stereo Preamp Power Amplifier Board Preamplifier Module DC 12V 5V-15V
- AD828 chip offers reliable and consistent performance in stereo preamp applications.; AD828 Operational Amplifier Front Amplifier, Audio Amplifier Module, Single Power Supply. Small volume design.; Working Voltage: DC 5V-15V Board Size: 33mm x 25mm AD828 Stereo Preamplifier Board; You can change the magnification, as follows: R7 and R5 are the gain set resistances (delivery gain default is about 5). However you can change the audio gain according to your needs by changing these two resistors from 5k to 47K, The greater the resistance, the higher the audio gain will be. If you are using radial lead resistors, then remove the original chip resistors from the circuit board and solder the leads into both sides of the pads provided on the circuit board.; 4Pcs AD828 Stereo Preamp Power Amplifier Board Preamplifier Module DC 12V 5V-15V
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Description Small size design, SMT process, input and output coupling capacitor using imported non-polar brand capacitors, op amp using fever-level AD828 chip.
Notice: the board without voltage regulation function, it is best to use a regulated power supply or battery-powered, otherwise there may be interference.
Working Voltage: DC 5V-15V
Board Size: 33mm x 25mm You can change the magnification, as
follows: R7 and R5 are the gain set resistances (delivery gain default is about 5). However you can change the audio gain according to your needs by changing these two resistors from 5k to 47K, The greater the resistance, the higher the audio gain will be. If you are using radial lead resistors, then remove the original chip resistors from the circuit board and solder the leads into both sides of the pads provided on the circuit board.
Packing List: 4pcs x AD828 Stereo Preamplifier Board
Notice: the board without voltage regulation function, it is best to use a regulated power supply or battery-powered, otherwise there may be interference.
Working Voltage: DC 5V-15V
Board Size: 33mm x 25mm You can change the magnification, as
follows: R7 and R5 are the gain set resistances (delivery gain default is about 5). However you can change the audio gain according to your needs by changing these two resistors from 5k to 47K, The greater the resistance, the higher the audio gain will be. If you are using radial lead resistors, then remove the original chip resistors from the circuit board and solder the leads into both sides of the pads provided on the circuit board.
Packing List: 4pcs x AD828 Stereo Preamplifier Board
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EmpressTech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...













