owc 1.0tb mercury extreme pro 6g ssd diy upgrade bundle for 2011, 2012 mac mini, includes data doubler, 5-piece installation toolkit

Use the OWC Data doubler to install an Mercury Extreme Pro 6G SSD inside your 2011 or later Mac mini. This DIY kit includes all the tools necessary to complete the installation of the Data Doubler and the new drive, coupled with our free installation videos that offer step-by-step instructions, you can perform the entire upgrade on your own. The Mac mini is already an amazing feat of engineering, and you can pack even more power inside it with the OWC Data Doubler and an OWC Mercury Extreme Pro 6G SSD. With the 5-piece Toolkit from OWC, everything is included to complete the installation of the SSD.

Once the upgrade is complete, you'll have a handy set of tools for future computer upgrades.
The Toolkit includes the following: Phillips #00 screw driver, Torx T6 screw driver, Torx T8 screw driver, Straight Blade 1.8 mm screw driver, Nylon Pry Tool (aka "Spudger").

Specifications

:
Controller: Silicon Motion SM2246EN Series with 7% Over Provisioning;
NAND: Tier 1 3D NAND;
Form Factor: Standard 7mm 2.5";
Interface: SATA 6Gb/s, 3Gb/s & 1.5G b/s supported, SATA 3.0 Compliant;
Capacity: 960GB useable capacity, Total Flash Memory Components - 1024GB, 64GB allocated to real-time data redundancy & error correction;
Formatted Capacity: 930 GiB;
RAID Support: Qualified for single drive and multiple drive production workstation RAID 0/1/10/0+1 and SPAN usage;
SMART Attributes: Standard;
Performance: Sequential Reads (Compressible
Data): up to 524MB/s; Sequential Writes (Compressible
Data): up to 413MB/s; Sequential Reads (Incompressible
Data): up to 516MB/s; Sequential Writes (Incompressible
Data): up to 404MB/s