1080P HDMI Extender Over Ethernet Network LAN Cable 212ft Cat5 Cat6/7 EDID 65m

1080P HDMI Extender Over Ethernet Network LAN Cable 212ft Cat5 Cat6/7 EDID 60M + 5MCan add additional 12ft over 200ft by connecting HDMI Cables on both endsProduct DescriptionMax 65mCat5e---262ft 80m, Cat5-Cat6/7/8--200ft 60m1080PSupport video resolution 1080P@30Hz19201080@30HzOne-to-One connectionDoes not support connecting multiple receivers, cannot connect to network switchSpecificonHDMI
Version: Highest
HDMI 1.4HDCP Version: Highest
HDCP 1.4HDR: NO HDR
Resolution: Highest 3840x2160@30Hz, compble
with 3DPOC: Two power adapter input 110V, output
12V/1AConnection instructions: HDMI
cable: HDMI 1.4 at 4K@30Hz, Preferably within 10ft.
Ethernet cable: Cat6/7 within 100m/328ft, Cat5e within 80m/262ft, Cat5 within 60m/200ft. Ethernet cable
RJ45 wiring sequence: T568B white orange, orange, white green, blue, white blue, green, white brown, brown-Remind: 1Directly connect your signal source and monitor before connecting HDMI Extender, and check the signal status. 2The red light is the power light, and the green light is the signal light. It is recommended to use 2 Ethernet cables for testing if there is no signal. If the red light is not on, please contact customer support by order number. 3RJ45 requires the conventional T568B standard. Need to change the wiring sequence if you are using T568A.
-How to set EDID: If this device can't recognize your TV's EDID during the first connection, set the following settings please. 1Connect the TV to the HDMI IN on TransmitterTX. 2Connect the power supply to Transmitter and turn on the TV. 3Hold EDID button for 3-5 seconds. Green light stops flashing, indicng EDID copy is complete. Then unplug the hdmi cable and connect the device normally again.
-Package Lists: 1x Transmitter1x Receiver2x Power adapter1x User manual