3G SDI Fiber Extender over LC Fiber Optical cable to 20Km 1080P HD SDI Video Audio Fiber Extension Broadcast Level with LC SFP(With AU Plug) (TX and RX)

Introduction:
The fiber extender transmits 3G/HD-SDI video signals over a long distance through a single fiber cable, and supports 8-channel embedded audio synchronization function; It can adapt to a variety of complex application environments. The equipment has excellent image processing and transmission capabilities, making the signal transmission more smooth and stable. It is a reliable, high performance and efficient 3G/HD-SDI signal extension mode.
Features:
1. Long distance transmission of 3G/HD-SDI video and audio signals through optical fiber, up to 3-20KM (default 3KM)
2. HD video signal resolution up to 1920*1080P@60Hz
3. Support all digital lossless transmission, 8-channel embedded audio and video synchronous transmission
4. Support local output, the remote end support two-way synchronous output
5. Support PAL/NTSC, strong compatibility, able to automatically identify and configure various display modes
6. Support plug and play and hot plug
7. Built-in automatic adjustment system, make the image smooth, clear and stable
8. Built-in ESD protection system
9. Simple to install, plug and play
Troubleshooting:
1. The red light (PWR) is not bright or the brightness is low, Check whether the power adapter is normal
2. When TX green light (STA) is not on; Check the signal source; The green light stays on indicates regular work.
3. RX green light (STA) is not on, check whether the optical fiber module of the TX contacts normally; The green light (STA) is not on when there is no signal from the TX; Long light indicates that TX and RX work normally.
4. If there is no image on the display, check whether the display selects the correct channel input
Specification:
Technical Norms: SMPTE standard
Video bit rate: MAX 3.2 GB/Second
Interface: BNC
Input/output cable specification: 150m (Belden 1694A cable standard)
Video input/output impedance: 75
Video input/output voltage: 1Vpp; Min: 0.5V pp/Max: 1.5V pp
Differential gain (10% ~ 90% APL): <1%
SDI resolution
625/25 PAL, 525/ 29.97NTSC, 525/ 23.98 NTSC
720P@50, 720P@ 59.94, 1080i@23/24/30/50/ 59.94, 1080P@ 23.98 /24/30/50/60
Support SDI specification
270Mbps(SD-SDI), 1.485G bps/M(HD-SDI)
SMPTE425M3Gb/s Mapping(3G-SDI)
SMPTE424M 3Gb/s serial
interface: (3G-SDI)
Optical fiber interface: LC
Fiber type: Single mode single fiber
wavelength: Single mode 1310nm; 1550nm
Max transmission distance Default: 3KM; Max: 20KM
Power: DC 5~12V/1A
Power Consumption: MAX 5W
Temperature: Operating temperature: -20 ~ +70
Humidity: Operating humidity: 0 ~ 90%
Mean time between failures: 100000hours
Package:
SDI extender TX x1pcs
SDI extender RX x1pcs
Power adapter x2pcs
User manual x1 pcs