(With EU Plug)(1TX and 1RX)4K 60Hz HDMI Extender 60M HDMI 2.0 Cascade Connection Extender over Cat5e/6 cable 120M HDMI Splitter Extension 1 TX to Multi RX

Product introduction:
This HDMI 2.0 60m extender uses single cat-5E or cat-6 (recommended) cable instead of HDMI cable, you can extend the HDMI 2.0 4K@60Hz signal to 60 meters. or 4K@30Hz and 1080P singal to 120 meters. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires.
Features:

1. By replacing the HDMI cable with a CAT5e or CAT6 cable (recommended), you can extend the HDMI 2.0 4K@60Hz signal by 60 meters or HDMI 1.4 4K@30Hz HDM 1.3 1080P for 120 meters.

2. The transmitter supports an HDMI ring to make it easier to monitor the source.
3. HDMI 2.0 4K@60Hz transmission technology, Support Point-to-Point, Multi-receiver cascade transmission mode.

4. Support infrared remote control remote expansion, remote control source device on the display side, easy to install, plug and play.

5. Widely used in video conferencing, monitoring center, multimedia teaching, home theater, etc., efficient and fast transmission of video to meet the needs of your various occasions.
Product parameters:
HDMI and HDCP versions: HDMI 2.0 /HDCP 2.2 (downward compatible)
Support: Point-to-Point
Support: Multi-receiver cascade transmission
HDMI 2.0 4K@60HZ transmission distance: CAT5e or CAT6 cable between receiver and transmitter up to 60 meters
HDMI 1.4 4K@30Hz HDM 1.3 1080P transmission distance: CAT5e or CAT6 cable between receiver and transmitter up to 120 meters
HDMI input resolution: 4K@60HZ/1080p/720p/576p/576i/480p/480i
HDMI output resolution: 4K@60HZ/1080p/720p/576p/576i/480p/480i
Support audio format: DTS/Dolby/LPCM
Maximum transmission bandwidth: 600MHz
Maximum transmission rate: 18Gbps
Input HDMI cable length: 10m AWG26 Standard HDMI
Output HDMI cable length: 10m AWG26 standard HDMI
Package Contents: (for TX and RX)
1: Extender transmitter x 1
2: Extender receiver x 1
3: Infrared transmitting and receiving line 1 set
4: 5 V power adapter x 2
Package Contents: (for Only 1 Receiver)
1: Extender receiver 1
2: Infrared receiving line x 1
3: 5 V power adapter x 1
Note Pls:

1. There are 2 options here, please buy according to your needs, we will send you the options you purchased.

2. The Receiver cannot be used alone, it needs to be used together with the Transmitter.
it supports up to 1 Transmitter and 12 Receivers to use together.

3. This product has two kinds of printed letters, either HDMI 2.0 or 4K60hz, they are equal, random delivery.