Ennovor Displayport Kvm Switch 2 Monitors 2 Computers 1440P 240hz Hotkey Switching kvm 2 Monitors 2 Computers displayport 240hz dp kvm Dual Monitor 144hz 165hz 240hz FreeSync G-SYNC

1. Kvm Switch 2 monitors 2 computers Display port Support DP 2.0 8K 60hz HDR 4K 175HZ 4K 240HZ With Displayport Equalizer, Long cable
2. Kvm Switch 2 monitors 2 computers Displayport Support DP1.4 8K 60hz RGB/YUV4:4:4 8K@30HZ,4K@144HZ ,4K@120Hz 5120X1440@60HZ5120X1440@75HZ5120X1440@144HZ5120X1440@165HZ
3. Support DP1.3
5120X2880@60HZ,3440x1440@75Hz,3440x1440@100Hz,3440x1440@144Hz,3440x1440@165Hz,3440x1440@175Hz;
2560*1440 144Hz,2560*1440@165Hz 3200*1800@60Hz,3200*1800@144Hz; 3840*1080@144Hz,3840*1080@240Hz; 3440*1600@144Hz,3840*1620@144Hz and so on.
4. Displayport KVM Switch 2 monitors 2 computers Support 1440P 120Hz1440P 144Hz1440P 160Hz1440P 165Hz,1440P 175Hz1440P 240Hz, 3840x1600 @ 144Hz, FreeSync, G-SYNC
5. Display port KVM Switch 2 monitors 2 computers support USB3.0 5G High Speed ,key board,Mouse, U DiskUSB MST
he Dual Monitor kvm Switch displayport has four switching modes, Mouse hotkey ,Keyboard hotkey,Boutton switching,wired switching .
If the dp kvm switch 2 monitors 2 computers cannot detect your Mouse or your keyboard, please just chose hotkey though to touch the hotkey button.then you can use button switching and wired switchingAnd you can email to us,we will try our best to fix the problem.
There are four ways to Switch PC-A TO PC-B
1. Button mode: push the switch button on the dual monitor kvm displayport indicated ,you can switch to PC-A or PC-B by pushing the switch button
2. Wired remote button mode: you can switch PC-A or PC-B by Wired remote button which connect to the dp kvm switch dual monitor
3. Mouse mode: Double Click the middle Roller of mouse +LB(Left Button) ,you can switch to PC-A, Double Click the middle roller of mouse +RB(Right Button),you can switch to PC-B.
4. Keyboard Hotkey Mode: You need to put the Hotkey button,them the Hotkey indcate on
Right Control two times and number 1 and EnterRight Ctrl+Right ctrl+1+Enteryou will switch to PC-A, and Right Ctrl+Right ctrl+2+Enter you will switch to PC-B. You can use Keyboard Hotkey Right Ctrl+Right ctrl+B+Enter to turn off or turn on the Beep for the dual monitor kvm switch.Thank you!
Attention: You can Right Ctrl+Right ctrl+R+Enter to Reset factory settings.
1,If all the cables are plugged in the Displayport kvm switch dual monitor 2 computer and it does not work, please re-plug the power cable.
2,If the Display port kvm switch dual monitor 2 computer lights are normal, try to replace the input and output DP Cables,
3,If the input and output DP cables are replaced and the video cannot be appear normally, you can try to unplug and plug the DP interface of the computer or try to replace the DP input interface of the monitor;
4:The 2 in 2 out displayport kvm can not pass with Boot Bios,and the computer switch for 2 computers dual monitor display port can not support USB-C to DPThe computer switch for 2 computers dual monitor displayport cannot support mac. The display port kvm switch dual monitor cannot support Laptop (usb-c output)
There many advantage of the Kvm switch 2 monitors 2 computers Display port:
1. Hotkey Switching : Mouse Switching and Keyboard Switching
2. Boutton Switching and Wired Switching
3. With Displayport Equalizer
4. High refresh rate Resolution Up to 240Hz
5. Drive -Free ,there is no need driver
6. 4 Port 5G USB3.0 Hub More faster than USB2.0
7Low power
8. Aluminium Alloy Shell
9, Multi Platform
10Four DP Cables
1.Type c to dp 1.4 kvm switch cable of ours (contain PHY of dp used for all our displayport kvm switches.
2.The usb c to dp1.4 kvm switch cable support thunderbolt output of laptop. It became Thunderbolt kvm Switch when Thunderbolt + Type c to dp+Displayport KVM switch.It is only used for all our displayport kvm switches.
3,Type c to dp 1.4 kvm switch cable support type-c output of laptop. It became Type c kvm Switch when you use the