Best Sellers
- $31.46
- + FREE SHIPPING
Meet Your Seller
ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for all processors (CPU, GPU - PC, PS4, XBOX), very high thermal conductivity, long durability, safe application, non-conductive
- WELL PROVEN QUALITY: The design of our thermal paste packagings has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality
- EXCELLENT PERFORMANCE: ARCTIC MX-4 thermal paste is made of carbon microparticles, guaranteeing extremely high thermal conductivity. This ensures that heat from the CPU/GPU is dissipated quickly & efficiently
- SAFE APPLICATION: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards
- 100 % ORIGINAL THROUGH AUTHENTICITY CHECK: Through our Authenticity Check, it is possible to verify the authenticity of every single product
- EASY TO APPLY: With an ideal consistency, the MX-4 is very easy to use, even for beginners
Any questions? Ask CelesteSM will help you find out quickly.
- Features :
- HIGHEST THERMAL CONDUCTIVITY
- The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTICs MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, guaranteeing that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. MX-4 proves without a doubt that great performance does not necessarily require a high price.
- EASY APPLICATION
- Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video below demonstrates the application technique to avoid air pockets between processors and coolers.
- SECURE USAGE
- In contrast to pastes based on metal oxides or liquid metal, ARCTICs MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.
- AVAILABLE IN VARIOUS SIZES
- ARCTIC MX-4 is available in sizes ranging from 2 to 45 grams. Resealable packaging prevents the paste from drying out.
- LONG-LASTING DURABILITY
- Compared to metal or silicone thermal pastes, you don't have to make any compromises with the MX-4: once applied, it lasts up to 8 years.
- PROVEN QUALITY
- While the packaging of our thermal paste has changed several times over the years, the composition of the formula has remained the same. Our MX pastes have long stood for high performance and quality, and with our new, recyclable packaging, we aim to reduce CO2 emissions and thus make a contribution to the environment.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by PlatinumMicro Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
ARCTIC MX-4 is a 4 g, carbon-microparticle thermal paste with an included spatula, designed to transfer heat from CPUs and GPUs; it suits PC builders and maintainers who want an easy-to-apply, non-electrically conductive compound.
Recommended For
- Desktop PC builders replacing or reseating a CPU cooler who want an affordable, non-electrically conductive paste with established performance. In one CPU test, MX-4 ran within 1.5°C of the top result among eight compounds.
- First-time PC builders or DIY repasters who want a paste ARCTIC describes as easy to apply, with a non-electrically conductive formula that reduces short-circuit risk if compound reaches nearby components.
- Desktop users running typical, non-extreme CPU workloads who want dependable cooling without paying extra for tiny temperature gains: a comparison test at about 120 W found MX-4, MX-6, and MX-7 within roughly 1°C of one another.
- PC maintainers who want one compound for standard CPU or GPU cooler contact surfaces; ARCTIC positions MX-4 for both, and its formula is non-electrically conductive.
Real-World Use Scenarios
- When installing or remounting a desktop CPU cooler, apply MX-4 between the processor and cooler to fill microscopic surface gaps and support heat transfer; actual temperatures still depend on cooler contact, airflow, and the rest of the system.
- When replacing old paste during PC maintenance, MX-4 can restore the thermal interface between a CPU and its cooler; temperature or fan-noise improvements are most likely when degraded paste was part of the problem.
- For CPU benchmarking or frequent cooler swaps, MX-4 can be reapplied between test runs to re-establish the thermal contact; a controlled review test found its CPU temperatures close to newer pastes in that specific setup.
- During a GPU or laptop cooling repair, MX-4 can be applied to the processor after the cooler is removed and the old paste is cleaned off; it helps re-establish heat transfer, but the repair also depends on correct reassembly and a clean cooling system.
- When servicing a PS4 or Xbox with heat or fan-noise concerns, MX-4 may be used when replacing the console’s thermal paste; treat it as one part of the repair, since dust, fan condition, paste coverage, or cooler seating can also affect the result.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Applying thermal paste to CPU and GPU processors |
| Format And Composition | Grey paste made with carbon microparticles, supplied in a tube |
| Size And Package Contents | 4 g with spatula; one item, piece, pack, and package, with a listed volume of 0.64 fluid ounces |
| Physical And Packaging Details | Item weight 0.04 kg; package weight 0.036 kg. Listed item dimensions are 1.2 × 2.8 × 5.9 inches; package dimensions are 1.397 × 2.2098 × 11.0998 cm |
| Product Attributes | Medium viscosity; listed as waterproof and not expiration-dated |
| Safety Attestation | Safety attestation: true |
| Brand And Model | ARCTIC MX-4, model ACTCP00031B |
| Packaging | Standard packaging |
Reference Q&A
Q: Should I choose ARCTIC MX-4 or MX-6 for a CPU repaste?
A: Choose MX-4 if you prefer a more easily spread paste and the included spatula. Choose MX-6 if you prioritize ARCTIC’s newer formulation and lower thermal resistance in its manufacturer comparison. In one independent CPU test, the temperature difference between them was small overall, with MX-6 showing a modest edge in some test conditions.
Q: Is it worth moving from ARCTIC MX-4 to MX-7?
A: MX-7 is ARCTIC’s newer performance-focused option, with a dense formula and cross-pattern application. In an independent test using a CPU drawing around 120 W, MX-4, MX-6, and MX-7 produced very similar temperatures, with MX-7’s measured lead over MX-4 staying below 1 °C. MX-4 remains a straightforward choice; consider MX-7 if you want the newer formula and its application approach.
Q: For GPU repasting, should I use ARCTIC MX-4 or MX-6?
A: Both are presented by ARCTIC for CPU and GPU use. MX-4 is a good fit if you prefer a paste that is easy to spread by hand. MX-6 is the more targeted option for direct-die cooling, such as graphics-card GPUs, and its higher viscosity is part of its design.
Q: Can I use ARCTIC MX-4 on a CPU or GPU?
A: Yes. MX-4 is intended for CPU and GPU cooling applications. It is metal-free and non-electrically conductive, and this 4 g package includes a spatula.
Q: Is ARCTIC MX-4 electrically conductive?
A: No. The product information describes MX-4 as metal-free and non-electrically conductive, which reduces the risk of a short circuit if paste contacts nearby components. Apply it carefully and follow the device’s service instructions.
Q: Is 4 g enough for more than one application?
A: It may be, depending on the number and size of the chips and how much paste each application requires. The listing specifies a 4 g tube but does not state a fixed number of applications.
Q: How long does ARCTIC MX-4 last?
A: ARCTIC describes MX-4 as long-lasting, but the available product information does not give a specific service-life interval. Actual replacement needs depend on the device and its use; follow the device manufacturer’s maintenance guidance.
Q: Is MX-4 worth buying if my cooler already includes thermal paste?
A: Usually not just for a performance upgrade: Reddit discussions describe differences among reputable pastes as small for typical builds and recommend using the paste supplied with a cooler. MX-4 may make sense if you need replacement paste or prefer its application feel.
Q: Is MX-4 suitable for repasting a PS4 or other console?
A: A Reddit discussion considers MX-4 adequate for a PS4 repaste, while noting that paste choice can depend on the application. The product information also lists consoles such as PS4 and Xbox as intended uses. For bare-die applications, users raise concerns about paste movement over time.
Q: Is MX-4 easy and safe for a beginner to apply?
A: The product information describes MX-4 as easy to apply and non-electrically conductive. Those properties can reduce application difficulty and short-circuit risk, but careful application and following the device’s service instructions are still important.
Q: Is MX-4 a good choice for a laptop or bare-die GPU?
A: It can be used, but Reddit users caution that MX-4 may be more prone to pump-out on bare dies than on a desktop CPU heat spreader. If long-term stability on a bare die is the priority, compare it with a thicker paste or a purpose-made alternative.







