Bear Claw Double-Headed screw specifically designed to securely hold your artwork and prevent it from falling or getting damaged
Bear Claw Long-neck and short-neck screw hooks make hanging tasks easier and more effortless
This screw is suitable for gypsum board walls, but not for concrete walls or ceramic walls.
Ideal for mounting picture frames, canvas arts, mirrors, ornaments, posters, clocks and other wall décor.
When installing, select the appropriate length of the screw according to the weight and type of the item to be hung. For example, for brackets with additional depth or frames that only have an edge for hanging, you can choose a wider screw; for wires, etc., you can use a shorter screw.
Can be used in conjunction with D-ring hangers, wire, sawtooth hangers, keyhole,and more wall hangers
D-ring picture hangers
Suitable for
d hooks
d rings heavy duty
d ring hangers
Keyhole hangers
Matching with
keyhole saw
decorative picture hangers
mirror hanging hardware
Sawtooth picture hangers
Compatible for
sawtooth picture hangers heavy duty
command sawtooth picture hangers
Picture wire
Fitting with
picture hanging wire
picture frame wire
picture frame wire for hanging
Approximate Weight Capacity (By Surface Type)
Hangers for drywall
without an anchor, it can holds up app 33lbs(15kg)
with anchor, it can holds up app 75lbs(34kg)
Hangers for wood stud
it can holds up app 100lbs(45kg
How to Use Bear Claw Screws
Preparation Work
Confirm the installation location. Ensure the surface of the gypsum board is flat, clean, and free of dust, debris, or other obstructions.
Installation Steps
This double-ended bear claw screw features a self-drilling tip, so pre-drilling a hole is not required.
Place the screw at the target position on the gypsum board, then use a screwdriver to drive it directly into the board until it is firmly secured.
Load-Bearing Tips
For heavier items, try to locate the wooden studs behind the gypsum board and install the screw into the stud—this will provide much stronger load-bearing capacity.
If wooden studs are unavailable and the item is heavy, use anchors to assist with fixation. This prevents the screw from loosening or the gypsum board from cracking under excessive weight.
When installing, select the appropriate length of the screw according to the weight and type of the item to be hung.
The overall length is 1" (25mm)
The diameter of the top is 0.23" (6mm), the diameter of the middle is 0.4" (10mm), and the length between the double head is 0.12" (3 mm)
The overall length is 1-3/8" (35mm)
The diameter of the top is 0.23" (6mm), the diameter of the middle is 0.27" (7mm), and the length between the double head is 0.12" (3 mm)
The overall length is 1-9/16" (40mm)
The diameter of the top is 0.23" (6mm), the diameter of the middle is 0.27" (7mm), and the length between the double head is 0.3" (7.5mm)
 laffeya Picture Hanging Screws, Double-Headed Bear Claw Screw, 4in1 Hooks for... |  laffeya Double Headed Screws, Bear Claw Screw Hanger, Picture Screws for Hang... |  Laffeya Double Headed Hanger Screws, for Hanging Pictures, Posters, Clocks on... |  laffeya Picture Hanging Marker Tool & Leveler - Use for Marking Hole Slot Loc... |  laffeya Precision Hanging Marker Kit, Picture Hanging Spacing Tool Built-in R... |  laffeya Sawtooth Picture Frame Hangers, Wall Pictures Hook Set with Adhesive ... | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — no data | — no data | — | — | — no data |
| Picture hanging tool | Bear claw screw | Short Bear claw screw | bearclaw hanger | Picture hanging marker | Picture frame spacer tool | Picture leveling hanging tool |
Bear Claw Double-Headed screw specifically designed to securely hold your artwork and prevent it from falling or getting damaged
Bear Claw Long-neck and short-neck screw hooks make hanging tasks easier and more effortless
This screw is suitable for gypsum board walls, but not for concrete walls or ceramic walls.
Ideal for mounting picture frames, canvas arts, mirrors, ornaments, posters, clocks and other wall décor.
When installing, select the appropriate length of the screw according to the weight and type of the item to be hung. For example, for brackets with additional depth or frames that only have an edge for hanging, you can choose a wider screw; for wires, etc., you can use a shorter screw.
Can be used in conjunction with D-ring hangers, wire, sawtooth hangers, keyhole,and more wall hangers
D-ring picture hangers
Suitable for
d hooks
d rings heavy duty
d ring hangers
Keyhole hangers
Matching with
keyhole saw
decorative picture hangers
mirror hanging hardware
Sawtooth picture hangers
Compatible for
sawtooth picture hangers heavy duty
command sawtooth picture hangers
Picture wire
Fitting with
picture hanging wire
picture frame wire
picture frame wire for hanging
Approximate Weight Capacity (By Surface Type)
Hangers for drywall
without an anchor, it can holds up app 33lbs(15kg)
with anchor, it can holds up app 75lbs(34kg)
Hangers for wood stud
it can holds up app 100lbs(45kg
How to Use Bear Claw Screws
Preparation Work
Confirm the installation location. Ensure the surface of the gypsum board is flat, clean, and free of dust, debris, or other obstructions.
Installation Steps
This double-ended bear claw screw features a self-drilling tip, so pre-drilling a hole is not required.
Place the screw at the target position on the gypsum board, then use a screwdriver to drive it directly into the board until it is firmly secured.
Load-Bearing Tips
For heavier items, try to locate the wooden studs behind the gypsum board and install the screw into the stud—this will provide much stronger load-bearing capacity.
If wooden studs are unavailable and the item is heavy, use anchors to assist with fixation. This prevents the screw from loosening or the gypsum board from cracking under excessive weight.
When installing, select the appropriate length of the screw according to the weight and type of the item to be hung.
The overall length is 1" (25mm)
The diameter of the top is 0.23" (6mm), the diameter of the middle is 0.4" (10mm), and the length between the double head is 0.12" (3 mm)
The overall length is 1-3/8" (35mm)
The diameter of the top is 0.23" (6mm), the diameter of the middle is 0.27" (7mm), and the length between the double head is 0.12" (3 mm)
The overall length is 1-9/16" (40mm)
The diameter of the top is 0.23" (6mm), the diameter of the middle is 0.27" (7mm), and the length between the double head is 0.3" (7.5mm)
laffeya Picture Hanging Screws, Double-Headed Bear Claw Screw, 4in1 Hooks for... | laffeya Double Headed Screws, Bear Claw Screw Hanger, Picture Screws for Hang... | Laffeya Double Headed Hanger Screws, for Hanging Pictures, Posters, Clocks on... | laffeya Picture Hanging Marker Tool & Leveler - Use for Marking Hole Slot Loc... | laffeya Precision Hanging Marker Kit, Picture Hanging Spacing Tool Built-in R... | laffeya Sawtooth Picture Frame Hangers, Wall Pictures Hook Set with Adhesive ... | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — no data | — no data | — | — | — no data |
| Picture hanging tool | Bear claw screw | Short Bear claw screw | bearclaw hanger | Picture hanging marker | Picture frame spacer tool | Picture leveling hanging tool |