FREE SHIPPING
Sold by: Direct from manufacturerVANTRUE VANTRUE
787 Ratings (88% Positive)
  • $18.99

Meet Your Sellers

Best Sellers

1,203 Sales
40 (88% Positive)
  • $18.99
  • + FREE SHIPPING

Are you an E-Blast Insider?

Vantrue S1 Dash Cam 11.5ft Mini USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection

In stock.
Ships from United States.
  • Compatible 12 – 24V Vehicles : This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
  • 24 Hours Surveillance: Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Note: If your car requires a start voltage higher than 11.6V for 24 hours parking mode, this hardwire kit may not work for your car.
  • Power Supply: Directly to the ignition wire for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff. The package come with 4 types fuse holder, Mini, ACS, ATO and Micro2 Add , which suit for most cars on the market.
  • Low voltage protection: With function of auto detect battery voltage and low voltage protecting, it can auto shut off power output when the battery voltage lower than 11.6V or 23.2V.
Overview
Specs
Reviews
24/7 Parking Surveillance
Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
Directly to the ignition wire for power only so it can turn on and off with the ignition.


Compatible 12 – 24V Vehicles
This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.


Low Voltage Protection
Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery.


Find the Correct Fuse Slot
Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.


Connect the Red Wire
Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.


Ground the Hardwiring Kit
Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

Key Features
Compatible with 12-24Vdc for car or truck installations.
Perfect for 24/7 Parking Surveillance.
Low voltage protection protects against battery dying.

What’s in the box
Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User Manual
Mini/LP ACN Add-A-Circuit Fuse Holder
Mini ACS Add-A-Circuit Fuse Holder
ATO ACU Add-A-Circuit Fuse Holder
Micro2 Add-A-Circuit Fuse Holder

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

  • Return for refund within: 30 days
  • Return for replacement within: 90 days
  • This item is covered by VANTRUE Return Policy

Manufacturer Contact Info

LOADING...
LOADING...