Audio-Technica ATM350UL Cardioid Condenser Instrument Microphone w/Clip-on System

Designed for use with brass, saxophone and other instruments, the ATM350UL Unmount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490L 9" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it the gooseneck wont flop around no matter how aggressively you move the instrument as you play.

The microphones cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Features: Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Unmount universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged Unmount 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hyper cardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option

Specifications

:
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40 - 20, 000 Hz Low
Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -49 dB (3. 5 mV) re 1V at 1
Pa Impedance: 200 Ohms Maximum
Input Sound Level: 159 dB SPL, 1 kHz at 1% T. H. D.
Dynamic Range (Typical): 130 dB, 1 kHz at
Max SPL Signal-To-Noise Ratio: 65 dB, 1 kHz at 1 Pa Phantom
Power Requirements: 11- 52V DC, 3.
5 mA typical Switch: Flat, roll-off
Output Connector: Power
Module: Integral 3-pin
XLRM-type Cable: 4. 0m (13. 12') long (permanently attached to microphone), 3. 2mm (0. 13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector Audio-Technical
Case Style: M36
Dimensions: Microphone (L x Maximum Dia. ): 37. 8 x 12. 2mm (1. 49 x 0. 48"), Power Module (L x Dia. ): 92 x 18. 9mm (3. 62 x 0.
74") Weight:
Microphone: 14. 5g (0.
51oz),
Power Module: 90g (3. 17oz)