Type:PCI-E Riser
Origin:Mainland China
Certification:NONE
M.2 to SATA 22PIN Transfer adapter card M2 KEY B-M SSD Hard Drive Adapter 2.5 inch Hard Drive Adapter transfer 6G interface
Product information
Product Name:
M. 2 ngff to SATA adapter card
Product brand:
ITHOO
Product model:
ENCNF2S-N01
Master control:
nothing
Product packaging:
Cowhide box
Product interface:
M.2 NGFF
SATA 22PIN
Support system:
Winxp / Vista / win7 / win8 32-bit / 64 bit MAC / Linux
Product introduction
Product features:
Transfer the m.2 hard disk defined by the key-b-m SATA of the motherboard to the SATA 22pin interface. The adapter board only connects the signal from the m.2 hard disk to the SATA 22pin connector, so the adapter card does not need to be driven. If you can't recognize the hard disk, please check whether it is an m.2 interface. The card will basically have no fault. Please know.
Support all SATA standard m2.ssds, do not support new nvme m2.ssds, say important things three times, do not support PCI-E M2 SSDs, do not understand read it three times!!!
Product introduction:
1:
This card is suitable for four different SSD hard disk lengths, and is suitable for different M2 (ngff) SSD hard disk lengths such as 3cm, 4.2cm, 6cm and 8cm. Using ceramic filter capacitor, high-power LDO voltage stabilizing control chip, stable performance! Our products are tested before shipment
The adapter card only changes the interface form of the solid-state drive and does not change any performance of your hard disk. What are your original hard disk parameters? With the adapter card, the performance of the output interface will not change.
Hardware
requirements:
Motherboard with SATA interface, notebook or adapter card
One M2 key B-M SSD
When shipping, the adapter card is not equipped with a hard disk. The above picture SSD is only for photography
Packaging accessories:
A: M.2 to SATA 22pin adapter card * 1
B: Screw * 4
Actual product picture 1