Dual Mini 6 Pin to 8 Pin PCI Express Video Card Power Adapter Cable for Mac Pro Tower/Power Mac G5 2X Mini 6 Pin Male to Standard 8 Pin PCIe Male, 18AWG 300W 15-inch (38cm) GPU Power Cord

1. CONVERT MAC MINI 6-PIN TO STANDARD PCIe 8-PIN UPGRADE YOUR GRAPHICS CARD This adapter cable features dual Mini 6-pin male connectors on one end (to plug into your Mac Pro or Power Mac G5 motherboard) and a standard 8-pin PCIe male connector on the other (to plug into your graphics card). It allows you to use modern PCIe video cards that require an 8-pin power connection in older Mac Pro and Power Mac G5 towers.
2. WIDE COMPATIBILITY MAC PRO (1,1 5,1) & POWER MAC G5 Compatible with all Mac Pro models (1,1), (2,1), (3,1), (4,1), (5,1) covering years 2006 through 2012, as well as Power Mac G5 models. The dual Mini 6-pin connectors are specifically designed for the proprietary power ports found on Mac Pro and Power Mac G5 logic boards.
3. PREMIUM 18AWG CONSTRUCTION 300W POWER RATING Built with high-quality 1007-18AWG tin-coated copper wire for stable power delivery and minimal voltage drop. Rated for 300W of continuous power, providing sufficient power for a wide range of modern graphics cards. The 15-inch (38cm) length provides flexible routing inside the Mac Pro tower chassis.
4. CRITICAL COMPATIBILITY WARNING MINI 6-PIN NOT STANDARD 6-PIN The connectors on the Mac motherboard end are Mini 6-pin, which are physically smaller than standard 6-pin PCIe connectors. This cable is exclusively designed for Mac Pro and Power Mac G5 logic boards. DO NOT attempt to use this cable with standard motherboards or non-Apple systems it will not fit and may cause damage.
5. PLUG-AND-PLAY SECURE CONNECTION LATCH Easy installation with secure latch connectors designed to prevent accidental disconnections during use. Simply connect the dual Mini 6-pin ends to your Macs logic board and the 8-pin end to your graphics card. No drivers or software required.

Are you looking to upgrade the graphics card in your Mac Pro or Power Mac G5, but your new GPU requires an 8-pin PCIe power connector that your Macs logic board doesnt directly support? This Dual Mini 6 Pin to 8 Pin PCI Express Power Adapter Cable is the solution.

Apples Mac Pro and Power Mac G5 towers use a proprietary Mini 6-pin power connector on the logic board, which is physically smaller than standard PCIe 6-pin connectors-1. This adapter cable bridges that gap, converting two Mini 6-pin outputs from your Macs motherboard into a single standard 8-pin PCIe connector for your graphics card-.

Whether youre installing a newer NVIDIA or AMD GPU, this cable provides the clean, reliable power connection you need to breathe new life into your classic Mac tower-.

Please verify your Mac model before purchasing. This cable is only compatible with the following systems:

Compatible Mac Models:

1. Mac Pro (1,1) 2006
2. Mac Pro (2,1) 2007
3. Mac Pro (3,1) 2008
4. Mac Pro (4,1) 2009
5. Mac Pro (5,1) 2010-2012
6. Power Mac G5 All PCIe-based models--1-3

NOT Compatible With:

1. Standard PC motherboards (non-Apple)
2. Mac laptops or iMacs
3. Mac Pro models after 2012 (6,1 trash can Mac Pro uses different power connectors)
4. Any system without Mini 6-pin power ports on the logic board

Note: The connectors on the Mac motherboard end are Mini 6-pin, which are physically smaller than standard 6-pin PCIe connectors-1. This cable is designed for Mac Pro and Power Mac G5 logic boards ONLY-1. If you connect this cable to incompatible motherboards, it will burn or damage the motherboards or graphics card-1.

Step 1: Identify Your Macs Power Ports Locate the two Mini 6-pin power connectors on your Mac Pro or Power Mac G5 logic board. These are typically located near the PCIe slots.

Step 2: Connect the Cable to Your Mac Plug the dual Mini 6-pin male ends into the corresponding Mini 6-pin ports on your Macs logic board. The connectors are keyed to fit only one way do not force them-.

Step 3: Connect to Your Graphics Card Plug the standard 8-pin PCIe male end into the 8-pin power port on your graphics card. Ensure the connector is fully seated you should hear or feel a slight click.

Note: If y