Your Browsing History
- Free 30-day Returns
$35.99
Ships from China.
Meet Your Seller
RGB LED Glow Computer Case Fan 120mm With Remote Fan Hub And Expansion Rack, Quiet High Airflow Adjustable Color PC Case CPU Computer Cooling With Coolers, With Radiator Cooling System (3Pieces)
- - Each RGB fan is equipped with two independent light loops, having great light coverage on both front and back side. Besides, this rgb led fan provide up to 366 lighting modes of automated cycle play and dynamic multicolored effects.
- -Built with RF Wireless Remote Controller, the case fan is easy to remote control on/off, and enables users easily to select preferred RGB lighting effects and colors(Note: Fan speed not controllable). Aslo the 2 pin reset switch on the controller hub be able to replace the reset button on your case to change fan colors.
- -The 120mm case fans featured with nine-page silica gel fan blade, rubber pads and hydraulic bearing, which greatly prevent vibration transfer to the chassis and to ensure low noise below 16 dBA.
- -The 6Pin interface special designed to provides RGB fan safe and reliable power output, much enough to support the Maximize airflow 1500 RPM.
- -Very suitable for computer DIY
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Features:
*120mm fan tuned for high-airflow and large volume cooling
*Colorful LED light design
*Provides improved performance over standard case fans
*Ultra-thin fan blades ensure less vibration, noise and turbulence
*Easy to change the color mode, effect and color change speed via the controller
*High-speed rotation to bring excellent cooling effect to the chassis
Specifications:
Type: RGB LED PC Fans
Material: ABS
LED Color: Multi-Colored
Speed: 1,100-1,800RPM
Current: 0.35A
Voltage: 12V
Fun Rated Power: 3.8W
Bearing: Hydro Bearing
Wind Flow: 33CFM
Estimated Lifespan: 20,000 Hours
Noise Value: 23.5dBA
Fan Size: 12 x 12 x 2.5cm / 4.7 x 4.7 x 1" (L x W x H)
Package Including:
3x RGB PC Fans
1x Molex Connector Cable
1x 21 Keys RF Remote Controller
1x Hub Box
Operation method:
A.
1.Press this button to enter the playback mode (when turned on)
2.Press and hold the button to enter the RGB color switching sequence. Press OFF to save and exit after setting(In off state)
B.
1.Turn on
2.Playback Pause
3.Press S to enter Light strip acceleration mode. Press S- to enter Light strip deceleration mode (when while playback is paused)
C.
1.The fan speeds up. (During normal playback)
2.Light strip Speed up (when playback is paused) (press on first)
D.
1.The fan speeds down. (During normal playback)
2.Light strip Speed down (when playback is paused) (press on first)
E.
Featured Mode +(Play in fixed mode)
F.
Featured Mode -(Play in fixed mode)
G.
Shutdown button (automatic save after shutdown)
H
brightness+
I
brightness-
J
When the RGB colors do not correspond, the button of the Auto button will light after pressing the button for 2 to 3 seconds. Then press the red button and the color will be red. Then press OFF to save and exit, the corresponding will be correct after restarting
K
Press and hold the button for 2 to 3 seconds while the power is on. The light of the white button will turn white. Then press the Auto button again. It will be paired automatically. Restore to original code after power failure
*120mm fan tuned for high-airflow and large volume cooling
*Colorful LED light design
*Provides improved performance over standard case fans
*Ultra-thin fan blades ensure less vibration, noise and turbulence
*Easy to change the color mode, effect and color change speed via the controller
*High-speed rotation to bring excellent cooling effect to the chassis
Specifications:
Type: RGB LED PC Fans
Material: ABS
LED Color: Multi-Colored
Speed: 1,100-1,800RPM
Current: 0.35A
Voltage: 12V
Fun Rated Power: 3.8W
Bearing: Hydro Bearing
Wind Flow: 33CFM
Estimated Lifespan: 20,000 Hours
Noise Value: 23.5dBA
Fan Size: 12 x 12 x 2.5cm / 4.7 x 4.7 x 1" (L x W x H)
Package Including:
3x RGB PC Fans
1x Molex Connector Cable
1x 21 Keys RF Remote Controller
1x Hub Box
Operation method:
A.
1.Press this button to enter the playback mode (when turned on)
2.Press and hold the button to enter the RGB color switching sequence. Press OFF to save and exit after setting(In off state)
B.
1.Turn on
2.Playback Pause
3.Press S to enter Light strip acceleration mode. Press S- to enter Light strip deceleration mode (when while playback is paused)
C.
1.The fan speeds up. (During normal playback)
2.Light strip Speed up (when playback is paused) (press on first)
D.
1.The fan speeds down. (During normal playback)
2.Light strip Speed down (when playback is paused) (press on first)
E.
Featured Mode +(Play in fixed mode)
F.
Featured Mode -(Play in fixed mode)
G.
Shutdown button (automatic save after shutdown)
H
brightness+
I
brightness-
J
When the RGB colors do not correspond, the button of the Auto button will light after pressing the button for 2 to 3 seconds. Then press the red button and the color will be red. Then press OFF to save and exit, the corresponding will be correct after restarting
K
Press and hold the button for 2 to 3 seconds while the power is on. The light of the white button will turn white. Then press the Auto button again. It will be paired automatically. Restore to original code after power failure
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by New Dream Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...