HighSpeed RightAngled Mini SAS HD SFF8087 to LeftAngled 4SATA 7Pin Internal Server Breakout Cable for RAID HBA Controller HDD SSD Backplane Storage Connection

This highperformance internal server breakout cable comes with rightangled Mini SAS HD SFF8087 connector at host end and four leftangled SATA 7pin connectors at drive end. The angled connector design eliminates bending stress on ports, perfectly solving installation obstacles inside densely packed rackmount servers, NAS enclosures and storage workstations where straight cables cannot be arranged properly. Fully compliant with SAS 3.0 industry standard, each SATA channel supports bandwidth up to 12Gbps, delivering consistent highspeed readwrite performance under continuous heavyload RAID operation. Goldplated contact pins enhance conductivity and resist oxidation, while builtin locking latches hold connectors firmly in place against cabinet vibration, preventing intermittent dropout and accidental disconnection. Multilayer shielding suppresses electromagnetic interference from surrounding power lines and circuit boards to maintain clean signal quality. Flexible cable construction simplifies routing and keeps good internal airflow for heat dissipation. This is forward breakout wiring: SFF8087 side connects to RAID card or HBA controller, four SATA ports hook up to SATA HDD, SSD or storage backplane. This cable transfers data only. Independent SATA power cables must be prepared to supply power for hard disk devices. Marked channel labels help quick identification during assembly and hardware troubleshooting. Suitable for server maintenance, storage array reconstruction and DIY NAS building. Please confirm your host interface is SFF8087 Mini SAS HD. It is not compatible with SFF8088 or other MiniSAS variants. Hard drives, RAID controllers and power accessories are not included.