1.47inch LCD Module 172×320 Resolution 262K RGB Colors IPS Display for Raspberry Pi, Arduino, STM32,Embedded ST7789V3 Driver,SPI Interface

Overview 1.47 inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface Features 1.47 inch LCD Display Module, Embedded ST7789V3 Driver, Using SPI Bus. Comes with examples for Raspberry Pi, Arduino, STM32, etc. 2. Controlled Via SPI Bus. Supports Controller Boards Like Raspberry Pi/Arduino/STM32 Parameter Working voltage: 3.3V /5V (please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
Communication interface: SPI
Screen Type: IPS
Control chip: ST7789V3
Resolution: 172 (H) RGB x 320 (V)
Display size: 17.39 x 32.35 mm
Pixel pitch: 0.0337 (H) x 0.1011 (V) mm
Product size: 22.0 × 38.5 mm LCD and the controller The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 172 (H) RGB x 320 (V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used. The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster. Package Content 1.47 inch LCD Module x1 PH 2.0 8PIN cable x1 Note 1. Please contact us if you have any problem. 2. The Raspberry Pi, Arduino, STM32 Board in the photo is NOT included.