RP2040-LCD-0.96-M Mini Board High-Performance Pico-Like MCU Board with Pre-Soldered Header Based on Raspberry Pi Microcontroller RP2040,Onboard 0.96 inch LCD,USB-C Connector,Low-Cost

Overview RP2040-LCD- 0.96 -M is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. In addition, there're also an onboard 0.96 inch IPS display, Lithium battery recharge/discharge header, and high-efficiency DC-DC buck-boost chip. Features RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory USB-C connector, keeps it up to date, easier to use 0.96 inch 160×80 pixels 65K colorful IPS LCD display Lithium battery recharge/discharge header, suitable for mobile devices Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost chip, 1.8A current switch Castellated module allows soldering directly to carrier boards (there should be dedicated cut-out for embedding the bottom components) USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip 8 × Programmable I/O (PIO) state machines for custom peripheral support Note Development Resources are provided, please contact us to get if you need.