ESP32-S3 2.1inch Capacitive Touch Round Display Development Board 480×480 Resolution 262K Color IPS Display,32-Bit LX7 Dual-Core Processor,Support WiFi & Bluetooth

ESP32-S3 2.1 inch Capacitive Touch Round Display Development Board, 480×480, IPS, 32-Bit LX7 Dual-Core Processor, Supports WiFi & Bluetooth, 262K Color, ESP32 With Display Features ESP32-S3-Touch-LCD- 2.1 is a microcontroller development board with 2.4GH z WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.1 inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GH z Wi-Fi ( 802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 2.1 inch capacitive touch display, 480×480 resolution, 262K color Supports touch control via I2C interface, with interrupt support Adapting UART, I2C and some IO interfaces, integrates full-speed USB port Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.

Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Package Content ESP32-S3-Touch-LCD- 2.1 x1 SH 1.0 12PIN cable ~100mm ×1 SH 1.0 4PIN cable ~100mm (2pcs) ×1 FAQ Why does the module keep resetting and blinking its status on the Device Manager interface? It may be due to Flash blank and the USB port is not stable, you can long-press the BOOT button, press RESET at the same time, and then release RESET, and then release the BOOT button, at this time the module can enter the download mode to burn the firmware (program) to solve the situation.

Note Technical Support is provided, please contact with us first if you have any problem.