Pre-Soldered Raspberry Pi Pico 2 W Microcontroller Board with Header,Supports WiFi 4 Wireless and Bluetooth 5.2,Based On RP2350 Dual-Core Processor

Overview Raspberry Pi Pico 2 WRP2350, Micro USB Raspberry Pi Pico 2 W RP2350, Micro USB Introduction Raspberry Pi Pico 2 W is an official Raspberry Pi-designed, low-cost yet flexible development platform based on the RP2350, which is a wireless upgrade of the Raspberry Pi Pico 2. It features all the characteristics of the Pico2 with the addition of a 2.4GH z wireless interface. Features RP2350 microcontroller chip designed by Raspberry Pi Adopts unique dual-core and dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V core processor, flexible clock running up to 150 MHz Built-in 520KB of SRAM and 4MB of on-chip Flash Supports Wi-Fi 4 wireless network and Bluetooth 5.2 Castellated module allows soldering directly to carrier boards USB 1.1 host and device support Supports low-power sleep and hibernation modes Drag-and-drop downloads can be made by USB recognition as mass storage 26 × multi-functional GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor Accelerated floating-point libraries on-chip 12 × Programmable I/O (PIO) state machines for custom peripheral support Package Content Raspberry Pi Pico 2 W with pre-soldered header (mono) x1 1*3PIN yellow pin header x1 USB-A to micro USB cable ~ 1.2 m x1 Note Technical Support is provided, please contact with us first if you have any problem.