Pre-Soldered Raspberry Pi Pico W Microcontroller Board Basic Kit,Built-in WiFi,Supports 2.4/5 GHZ Wi-Fi 4,Based On RP2040 Dual-Core Processor

Raspberry Pi Pico W Microcontroller Board with pre-soldered headers, Built-In WiFi, Based On Official RP2040 Dual-Core Processor Board

Specifications

Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication..
Key features include: RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz Onboard Infineon CYW43439 wireless chip, supports 2.4 /5 GHZ Wi-Fi 4 264KB of SRAM, and 2MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip 8 × Programmable I/O (PIO) state machines for custom peripheral support Package Content Raspberry Pi Pico W with pre-soldered header x1 1*3PIN yellow pin header x1 USB-A to micro-B cable x1 FAQ What can I do if the Raspberry Pi Pico is disturbbed? 1. The pin that sets the input state must be initially pulled high or pulled low. 2. Replace the USB cable to see if there is a problem with the USB cable used. Note Online Development Resources is provided, please contact us if you have any problem.