Your Browsing History
Meet Your Seller
1.5inch RGB OLED Display Module 128×128 Pixels, 65K RGB Display Colors, SPI Inte
- Waveshare 1.5inch RGB OLED Display Module, 128×128 resolution OLED display, 65K RGB colors, clear and colorful displaying effect
- SPI interface. This module selects 4wire-SPI and 3wire-SPI as the communication method, which reduces the area of the module and saves the IO resources of the controller
- Operating voltage: 3.3V/5V(Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
- The built-in driver used by this OLED is SSD1351, which is a 128RGB * 128 Dot Matrix OLED/PLED controller with a 128*128*18bit SRAM as a display buffer area, which supports two color depths of 262k and 65k. And supports 8bit 8080 parallel, 8bit 6800 parallel, 3wire-SPI and 4wire-SPI and other communication methods
- Comes with Online Development Resources (examples for Raspberry Pi/Arduino/STM32), Please check: n9.cl/gi1pu
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Waveshare 1.5 inch RGB OLED Display Module, 128×128 resolution OLED display, 65K RGB colors, clear and colorful displaying effect
SPI interface. This module selects 4wire-SPI and 3wire-SPI as the communication method, which reduces the area of the module and saves the IO resources of the controller
Operating voltage: 3.3V /5V(Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
The built-in driver used by this OLED is SSD1351, which is a 128RGB * 128 Dot Matrix OLED/PLED controller with a 128*128*18bit SRAM as a display buffer area, which supports two color depths of 262k and 65k. And supports 8bit 8080 parallel, 8bit 6800 parallel, 3wire-SPI and 4wire-SPI and other communication methods
Comes with Online Development Resources (examples for Raspberry Pi/Arduino/STM32), Please
check: n9. cl/gi1pu
SPI interface. This module selects 4wire-SPI and 3wire-SPI as the communication method, which reduces the area of the module and saves the IO resources of the controller
Operating voltage: 3.3V /5V(Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
The built-in driver used by this OLED is SSD1351, which is a 128RGB * 128 Dot Matrix OLED/PLED controller with a 128*128*18bit SRAM as a display buffer area, which supports two color depths of 262k and 65k. And supports 8bit 8080 parallel, 8bit 6800 parallel, 3wire-SPI and 4wire-SPI and other communication methods
Comes with Online Development Resources (examples for Raspberry Pi/Arduino/STM32), Please
check: n9. cl/gi1pu
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by GearZap Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...