Your Browsing History
Meet Your Seller
RP2350-Plus Pico-Like MCU Board with Pre-Soldered Header, Based On RPi RP2350A D
- RP2350-Plus Development Board with Pre-Soldered Header, based on the RP2350 development board, it is an enhanced version of RPi Pico 2. Based on compatibility with the majority of RPi Pico 2 modules, enhance or add some extra features
- Based on RP2350A, which adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz. 520KB of SRAM, and 4MB of on-board Flash memory
- Type-C connector, keeps it up to date, easier to use. Castellated module allows soldering directly to carrier boards. Batte -ry recharge/discharge header, suitable for mobile devices
- Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes
- 26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels. 12 x Programmable I/O (PIO) state machines for custom peripheral support
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
RP2350-Plus Development Board with Pre-Soldered Header, based on the RP2350 development board, it is an enhanced version of RPi Pico 2. Based on compatibility with the majority of RPi Pico 2 modules, enhance or add some extra features
Based on RP2350A, which adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz. 520KB of SRAM, and 4MB of on-board Flash memory
Type-C connector, keeps it up to date, easier to use. Castellated module allows soldering directly to carrier boards. Batte -ry recharge/discharge header, suitable for mobile devices
Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes
26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels. 12 x Programmable I/O (PIO) state machines for custom peripheral support
Based on RP2350A, which adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz. 520KB of SRAM, and 4MB of on-board Flash memory
Type-C connector, keeps it up to date, easier to use. Castellated module allows soldering directly to carrier boards. Batte -ry recharge/discharge header, suitable for mobile devices
Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes
26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels. 12 x Programmable I/O (PIO) state machines for custom peripheral support
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by GearZap Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...