ORTUR Laser Master 2 Pro S2-SF Laser Engraver, Laser Engraving Cutting Machine, DIY Laser Marking for Metal, Wood, Compresed Spot CNC, 32-bit Motherboard LaserGRBL(LightBurn), 400x400mm

• Specialized Motherboard with 32Bits MCU It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
• The Most Advanced 32Bits Laser Engraver Firmware Ortur laser master firmware, smarter, faster, higher precision and easier to use.
• Laser power range could be S0 - S1000, compared to 8bits desktop laser engravers, which only has S0 - S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8bits high power laser engravers could not do.
• Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S )
• Active Position Protection There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.

• Laser Beam Safety Guard If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire.
• Exposure Duration Detection and Limitation If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
• LaserGRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser LaserGRBL for engraving and cutting.
• LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.
• This laser engraver supports PWM mode.
• Pre-assembled parts, just need 10 - 20 minutes to install the machine.

• 400 x 400 mm large engraving area.
• Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance
• Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.400 x 400 mm large engraving area.

1.When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.

2. Do NOT operate laser without eye protection (Laser goggles).

3. Please set up laser engraver in the fireproofing area, with good ventilation.

4. Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection.