M2 Key A/E to M.2 NVME-Compatible Expansion Card WiFi Interface to M.2 SSD Converter Adapter

M2 KEY A/E to M. 2 NVME-compatible Expansion Card WIFI Interface to M. 2 SSD Converter
Adapter Product requirements: 1. The adapter card must be pcie protocol card can be used, cnvi protocol can not be used. 2. After pcie network card transfer, can only use M2 NVME-compatible hard drive, M. 2 SATA protocol hard drive can not be used. If you transfer success, please
understand the following knowledge: In¡¤tel6 generation (including 6 generation) processor loaded default BIOS recognition, you can do the system disc to start in¡¤tel4-5 generation motherboards, the use of BIOS without NVME-compatible driver, can not be identified, boot into the system can be done to identify the system, that is, on behalf of the sub-disc can be done to store, can not do the system boot disc. 3. must be tested and used without problems, you can cut the M. 2 adapter PCB board, because the cut affects the secondary sales. 4. Electronic devices are compatible. It is impossible to 100% The adapter card is no chip, it does not affect anything. If you can't use it, then it should be incompatible between your device and the hard drive.
Product Description: This adapter is mainly used to convert the motherboard's m2 WiFi card interface to one that can be used by inserting a nvme-compatible hard drive. There are many kinds of M. 2 slots with the same appearance. This adapter is only suitable for M. 2 KEY-A/E slot interface. Please check if your motherboard is M. 2 KEY-A or E slot before ordering. Generally this port is plugged into the wireless network card (Note that the interface of CNIV can't be used).