E3D Prusa i3 Aero Upgrade Kit

Key Features:

• Upgrade your standard i3 Machine to the Titan Aero
• Machine requirements apply to this upgrade kit
• Unassembled upgrade kit
• Available in 12V 1.75 mm only

Upgrade your Prusa i3-style 3D printer with this Titan Aero two-in-one HotEnd and Extruder kit. Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own.

This upgrade kit is intended for us with a standard i3 printer. It is not suitable for use with the original I3 Mk2 / Mk2S or Mk3 as it does not have any means of attaching the PINDA sensor. Additionally, the mounting bracket for this upgrade is similar in design to that of the standard V6-i3 upgrade kit, however, they are NOT interchangeable.

Item Specifics
1 - 50x50x15mm 12V Side Blow Fan
1 - Printed i3 fan duct with attached cable
10 - cable ties
2 - M3x40 screws
1 - Printed i3 carriage mount
1 - Titan Motor
1 - Standard Titan Extruder Kit
1 - Standard Titan Aero Upgrade Kit
1 - Fixings Kit
1 - Thermistor Cartridge
1 - 12V 30W Heater Cartridge
1 - Molex Cable
1 - Standard V6 Silicone Sock
1 - V6 Aluminium Heater Block
1 - V6 HeatBreak
1 - Brass V6 Nozzle ( 0.4 mm)

Machine Requirements
1. 8mm Rods using LM8UU Bearings (or similar)
2. 45mm Rod Spacing, ~15mm Belt Spacing
3. One bearing on the top rod, two on the bottom, or the other way around