ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer

Higher CompatibilityAnycubic Wash and Cure 3 Plus upgraded the washing size 8.97 ' ' x 5.03 ' ' x 10.23 ' '. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4 % to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
Flexicure Gooseneck LightDue to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30, 000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
Better Curing EffectThe Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
Efficient IPA utilizationThe dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
Dual-layer CuringA specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.