FYSETC 3D Printing Build Platform CR10 S5 Flexible Spring Steel Sheet 510x510mm/20x20in Double Sided Textured Pei Powder Coated Gold Build Plate with Sticker Base Compatible with CR10 S5

Upgrade Spring Steel Sheet, Gold, Both sides can be used. Flexible, removable, can stick to magletics very well. High strength and heat resistance. Comes with a soft Sticker base.
Size: 510 x 510mm/20*20 inch, compatible with Crealty CR10 S5 or other same size hotbed/build plate. Not rely on the build volume/printing size.
Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get deformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
Easy to install, take off the back paper on the magletic base, stick it to the heated bed, then align the steel plate on it. The model can be easily removed by bending the plate when the bed temp cools down, without the need for additional adhesives, tapes, or slurry. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded.
To clean, Just wipe down with isopropyl alcohol between prints for best results. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol.