What is PETG Material?
• PETG (Polyethylene Terephthalate Glycol-Modified) is a rigid, tough, high performance material. It has the advantages of high toughness and good mechanical properties (like ABS), also has the characteristics of ease to print and minimum warping (like PLA).
6 Available Colors:
Solid Black, Solid White, Solid Grey, Solid Purple, Natural, Orange
Recommended Printing Parameters:
• Printing Temperature: 230-250? (Recommended Temperature 240?)
• Bed Temperature: 75-90°C
• Fan Speed: 100%
• Printing Speed: 40-100mm/s
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging + Product Manual
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
• PETG material is easily stringing after absorbing water, it will be better drying at 65? for more than 3 hours before printing.
• The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
Comparison of eSUN PLA Series Filament
 PETG |  Upgraded Matte PLA |  ePLA Lite |  PLA Plus |  Silk PLA |  Silk Magic PLA |  Lightweight PLA | |
|---|---|---|---|---|---|---|---|
Customer Reviews | — | — | — | — | — | — | — |
Price | — | — | — | — | — | — | — |
Density(g/cm3) | 1.27 | 1.329 | 1.23 | 1.23 | 1.21 | 1.256 | 1.2 |
Heat Distortion Temp(0.45MPa) | 64 | 51 | 53 | 53 | 50 | 54.7 | 53 |
Melt Flow Index(g/10min) | 20(250?/2.16kg) | 5.8(190?/2.16kg) | 5.7(190?/2.16kg) | 5(190?/2.16kg) | 4.8(190?/2.16kg) | 11.32(190?/2.16kg) | 8.1(190?/2.16kg) |
Tensile Strength(MPa) | 52.2 | 42 | 61.34 | 60 | 52 | 57.64 | 32.2 |
Elongation at Break(%) | 83 | 50 | 29.92 | 20 | 14.4 | 21.76 | 68.9 |
Flexural Strength(MPa) | 58.1 | 59.95 | 100.27 | 74 | 65 | 78.7 | 41.31 |
Flexural Modulus(MPa) | 1073 | 2878.5 | 3824 | 1973 | 1447 | 2800.36 | 1701 |
IZOD Impact Strength(kJ/?) | 4.7 | 6.2 | 6.3 | 6 | 5.86 | 6.45 | 8.58 |
Printing Temperature | 230 - 250? | 190 - 230? | 190-230? | 210 - 230? | 190 - 230? | 190 - 230? | 190 - 270? |
Bed Temperature | 75-90°C | 45 - 60°C | 45 - 60°C | 45 - 60°C | 45 - 60°C | 45 - 60°C | 45 - 60°C |
Fan Speed | 100% | 100% | 100% | 100% | 100% | 100% | 100% |
Printing Speed | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s |
ABOUT US
Founded in 2002, eSUN is one of the global professional 3D printing material & 3D printing supply manufacturers.
In R&D, eSUN has more than ten international and domestic patented technologies, and is the drafting unit of the national standard for PLA 3D printing filaments.
After years of market development, eSUN has more than 50 agents and distributors around the world, and its products are sold to more than 100 countries and regions.
Outstanding Brand Development Award for Brand "eSUN" from .
eSUN 3D Printer Filament
Compatible with most FDM 3D printers.
PLA Series
High Speed Series
Silk PLA Series
ABS+ & PETG Filament
eBOX-Lite & Vaccum Family
Hard Tough Resin
eSUN PETG Filament 1.75mm, PETG 3D Printer Filament, 1KG Spool (2.2 LBS)
What is PETG Material?
• PETG (Polyethylene Terephthalate Glycol-Modified) is a rigid, tough, high performance material. It has the advantages of high toughness and good mechanical properties (like ABS), also has the characteristics of ease to print and minimum warping (like PLA).
6 Available Colors:
Solid Black, Solid White, Solid Grey, Solid Purple, Natural, Orange
Recommended Printing Parameters:
• Printing Temperature: 230-250? (Recommended Temperature 240?)
• Bed Temperature: 75-90°C
• Fan Speed: 100%
• Printing Speed: 40-100mm/s
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging + Product Manual
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
• PETG material is easily stringing after absorbing water, it will be better drying at 65? for more than 3 hours before printing.
• The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
Comparison of eSUN PLA Series Filament
PETG |  Upgraded Matte PLA | ePLA Lite | PLA Plus | Silk PLA | Silk Magic PLA | Lightweight PLA |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Density(g/cm3) | ||||||
| 1.27 | 1.329 | 1.23 | 1.23 | 1.21 | 1.256 | 1.2 |
| Heat Distortion Temp(0.45MPa) | ||||||
| 64 | 51 | 53 | 53 | 50 | 54.7 | 53 |
| Melt Flow Index(g/10min) | ||||||
| 20(250?/2.16kg) | 5.8(190?/2.16kg) | 5.7(190?/2.16kg) | 5(190?/2.16kg) | 4.8(190?/2.16kg) | 11.32(190?/2.16kg) | 8.1(190?/2.16kg) |
| Tensile Strength(MPa) | ||||||
| 52.2 | 42 | 61.34 | 60 | 52 | 57.64 | 32.2 |
| Elongation at Break(%) | ||||||
| 83 | 50 | 29.92 | 20 | 14.4 | 21.76 | 68.9 |
| Flexural Strength(MPa) | ||||||
| 58.1 | 59.95 | 100.27 | 74 | 65 | 78.7 | 41.31 |
| Flexural Modulus(MPa) | ||||||
| 1073 | 2878.5 | 3824 | 1973 | 1447 | 2800.36 | 1701 |
| IZOD Impact Strength(kJ/?) | ||||||
| 4.7 | 6.2 | 6.3 | 6 | 5.86 | 6.45 | 8.58 |
| Printing Temperature | ||||||
| 230 - 250? | 190 - 230? | 190-230? | 210 - 230? | 190 - 230? | 190 - 230? | 190 - 270? |
| Bed Temperature | ||||||
| 75-90°C | 45 - 60°C | 45 - 60°C | 45 - 60°C | 45 - 60°C | 45 - 60°C | 45 - 60°C |
| Fan Speed | ||||||
| 100% | 100% | 100% | 100% | 100% | 100% | 100% |
| Printing Speed | ||||||
| 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s |
ABOUT US
Founded in 2002, eSUN is one of the global professional 3D printing material & 3D printing supply manufacturers.
In R&D, eSUN has more than ten international and domestic patented technologies, and is the drafting unit of the national standard for PLA 3D printing filaments.
After years of market development, eSUN has more than 50 agents and distributors around the world, and its products are sold to more than 100 countries and regions.
Outstanding Brand Development Award for Brand "eSUN" from .
eSUN 3D Printer Filament
Compatible with most FDM 3D printers.
PLA Series
High Speed Series
Silk PLA Series
ABS+ & PETG Filament
eBOX-Lite & Vaccum Family
Hard Tough Resin
