- CC3D PLA MAX FILAMENT
- What is PLA MAX filament?
- PLA Max is a new 3d printing material developed by CC3D– known for being extremely tough.
- PLA MAX is made of Polylactic Acid with reinforcement technology.It is a biological material, extracted and purified from corn grain, eco- friendly, and harmless to human.It is a non-toxic filament and has no unpleasant smell while being printed.
High Strength. Better Toughness. Several times tougher than regular PLA.
Superb layer bonding.Sticks very well both to bed and layer to layer.
High Purity.No Print Head Clogging.
Better Line Diameter Control,Smoother finished printouts.
Product Description
Filament: PLA MAX
- Net Weight: 1000g
- Diameter (Tolerance): 1.75 mm ±0.02 mm
- Vacuum packed.
- Spool Diameter: 7.8"
- Spool Height: 2.55"
- Spool Hub Hole Diameter: 2.08"
Start Your Artistic Creation Now!
Print Settings and Tips:
- Recommended Printing Temperature:220±10° C
- PLA MAX Print temperature is about 15? higher than Regular PLA. Most users print at around 215 to 225?.
- Recommended Bed Temperature:60-70° C
- Recommended Print Speed:50 -60mm/s.
- Print Settings may vary with different printers.
Support and After-sales:
- We have been committed to producing high-quality products and providing customers with a good experience. If there is any quality problem, we will definitely solve the problem until you are satisfied.
- CC3D PLA MAX FILAMENT
- What is PLA MAX filament?
- PLA Max is a new 3d printing material developed by CC3D– known for being extremely tough.
- PLA MAX is made of Polylactic Acid with reinforcement technology.It is a biological material, extracted and purified from corn grain, eco- friendly, and harmless to human.It is a non-toxic filament and has no unpleasant smell while being printed.
High Strength. Better Toughness. Several times tougher than regular PLA.
Superb layer bonding.Sticks very well both to bed and layer to layer.
High Purity.No Print Head Clogging.
Better Line Diameter Control,Smoother finished printouts.
Product Description
Filament: PLA MAX
- Net Weight: 1000g
- Diameter (Tolerance): 1.75 mm ±0.02 mm
- Vacuum packed.
- Spool Diameter: 7.8"
- Spool Height: 2.55"
- Spool Hub Hole Diameter: 2.08"
Start Your Artistic Creation Now!
Print Settings and Tips:
- Recommended Printing Temperature:220±10° C
- PLA MAX Print temperature is about 15? higher than Regular PLA. Most users print at around 215 to 225?.
- Recommended Bed Temperature:60-70° C
- Recommended Print Speed:50 -60mm/s.
- Print Settings may vary with different printers.
Support and After-sales:
- We have been committed to producing high-quality products and providing customers with a good experience. If there is any quality problem, we will definitely solve the problem until you are satisfied.