Comparison of the C Series
Recommend SFX PSU for better cable space; SFX-L reduces it further. For large air coolers, skip top fan or use a 15mm slim one. Install the rear 9cm fan first.
Fan installation depends on case size, motherboard, and air cooler volume. The front-bottom 80mm fan conflicts with dual-fan GPUs and is usually unusable. The cooler fan is shown on the left only to expose ARGB RAM; normally it should be mounted on the right, blowing left through the tower.
Using a single-fan GPU will make the installation process simpler. It is recommended to use 5060/TI, with the maximum support being 5070. For example, MSI 5070 VENTUS 2X.
The PSU fan is facing the front panel of the case. The overall airflow direction is as shown in the figure. It is recommended to use CPU models 245K, 9600X. A small air-cooled radiator can handle the heat dissipation.
Comparison of the C Series
C24 Mini ITX |
C25Plus Compact ITX |
C26 Mini MATX |
C28 Compact MATX |
|---|---|---|---|
| Customer Reviews | |||
| — | — | — | — |
| Price | |||
| — | — | — | — |
| L*W*H | |||
| 249*160*249 | 274*185*259 | 315*158*266 | 342*185*284 |
| Motherboard type | |||
| ITX Within 172 * 172mm | ITX Within 172 * 172mm | MATX Within 245 * 245mm | MATX Within 245 * 245mm |
| Air cooler | |||
| Height limit 135mm | Height limit 162mm | Height limit 135mm | Height limit 162mm |
| Aio | |||
| Not Supported | 120 Aio | Not Supported | 120/240 Aio |
| GPU | |||
| within L 245mm, w135mm | within L 269mm, w162mm | within L 310mm, w135mm | within L 335mm, w162mm |
| PSU | |||
| SFX/SFX-L | SFX/L,ATX14cm | SFX | ATX14cm(Only air cooler)/SFX/L |
Recommend SFX PSU for better cable space; SFX-L reduces it further. For large air coolers, skip top fan or use a 15mm slim one. Install the rear 9cm fan first.
Fan installation depends on case size, motherboard, and air cooler volume. The front-bottom 80mm fan conflicts with dual-fan GPUs and is usually unusable. The cooler fan is shown on the left only to expose ARGB RAM; normally it should be mounted on the right, blowing left through the tower.
Using a single-fan GPU will make the installation process simpler. It is recommended to use 5060/TI, with the maximum support being 5070. For example, MSI 5070 VENTUS 2X.
The PSU fan is facing the front panel of the case. The overall airflow direction is as shown in the figure. It is recommended to use CPU models 245K, 9600X. A small air-cooled radiator can handle the heat dissipation.





















