Your Browsing History
- Free 30-day Returns
$22.99
Meet Your Seller
Visit OVERTURE 3D Store
FOLLOW
OVERTURE ABS Filament 1.75mm, ABS 1kg Spool (2.2lbs),3D Printer Filament,Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer (Natural)
- Impact and Heat Resistant - OVERTURE ABS filament 1.75mm is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104C) and good mechanical properties. It's a good choice for functional parts that require durability or high temperature resistance
- Higher Stability - OVERTURE 1.75 ABS Filament is made with a specialty ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV resistant feature, we recommed our UV resistant ASA filament for your outdoor requirements
- Moisture Free - Our ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with dessicant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament
- Important Note - Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing s
+
+
Overview
Specs
Reviews
Note: The recommended print setup for Overture filaments could be slightly different from other filaments; Pls read the description below, you may also get some practical suggestions through QA/ Top Review from others.
FAQs:
Why can't the filaments stick to the build bed?
1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature;
2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
4. If the effect is not good, it is recommended to try printing the draft before printing.
Specification:
Recommended Extrusion/Nozzle Temp: 245 °C - 265°C (473~ 509 ),
Heated Bed Temp: 80°C - 100 °C (176~ 212)/ PVP stick helps
Printing Speed: 30~70 mm/s (1, 800~4, 200mm/ min)
Fan: Low for better surface quality; Off for better strength
Raft
Filaments Diameter and Accuracy: 1.75 mm +/- 0.05
Filaments Net Weight: 1 kg ( 2.2 lbs)
Packaging Included:
1 × spool of ABS filaments
FAQs:
Why can't the filaments stick to the build bed?
1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature;
2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
4. If the effect is not good, it is recommended to try printing the draft before printing.
Specification:
Recommended Extrusion/Nozzle Temp: 245 °C - 265°C (473~ 509 ),
Heated Bed Temp: 80°C - 100 °C (176~ 212)/ PVP stick helps
Printing Speed: 30~70 mm/s (1, 800~4, 200mm/ min)
Fan: Low for better surface quality; Off for better strength
Raft
Filaments Diameter and Accuracy: 1.75 mm +/- 0.05
Filaments Net Weight: 1 kg ( 2.2 lbs)
Packaging Included:
1 × spool of ABS filaments
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by OVERTURE 3D Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...