HPE Networking 10G SR SFP+ LC 400m OM4 MMF C-Class Transceiver - For Data Networking, Optical Network - 1 x LC 10GBase-SR Network - Optical Fiber - Multi-mode - 10 Gigabit Ethernet - 10GBase-SR0.40 km

The HPE Networking 10G SR SFP+ LC transceiver is a multimode fiber module for 10 Gigabit Ethernet links up to 400 m over OM4 fiber, suited to network teams connecting compatible HPE equipment.

Recommended For

• Network teams linking HPE-supported switches across a server room or campus building with existing OM4 multimode fiber, where a 10GbE connection up to 400 m is needed.
• IT staff upgrading an HPE network link to 10GbE while reusing OM3 fiber, for runs within the listed 300 m OM3 reach.
• Data-center or enterprise network administrators connecting SFP+ ports over duplex LC multimode fiber, after confirming the exact HPE switch model and transceiver part number are supported.
• Operators replacing or adding an HPE 10GBASE-SR optical module in an existing multimode-fiber link that uses duplex LC connectors.

Real-World Use Scenarios

• Connect a compatible HPE/Aruba switch to another switch over installed OM4 multimode fiber—for example, an access switch to an aggregation switch. With compatible optics at both ends and a supported link within the fiber’s reach, this provides a 10GbE uplink without running copper between them.
• Link a server or storage system with a 10GbE SFP+ port to a compatible switch using a duplex LC multimode fiber patch. This suits short in-rack or nearby equipment connections when both devices support the transceiver and the fiber type matches.
• Use an existing OM4 fiber run to connect network equipment in separate rooms, floors, or nearby buildings within the supported link distance. It can be useful when a copper Ethernet run is impractical; check the switch’s transceiver support and the complete fiber path before deployment.
• Build a 10GbE fiber link between homelab servers or between a server and a switch when the equipment has compatible SFP+ ports. Community discussions commonly describe this setup with SR optics and LC multimode fiber; confirm device compatibility rather than assuming an HPE-coded module will work in every brand of port.

Spec Summary