Upgrade your network with a trusted, compatible, and future-ready SFP+ optical module. Enjoy reliable 1.25/2.5/5/10G-T fibre connectivity!
Whether you require server transceivers, network modules, or transceivers for technical upgrades/repairs—this SFP+ RJ45-10G-30M transceiver delivers professional-grade performance.
Why Choose This 10GBASE-T SFP+ Module?
1.True 1.25/2.5/5/10G-T Copper Connectivity in an SFP+ Form Factor
This hot-pluggable SFP+ transceiver delivers full 10 Gigabit Ethernet over standard Cat6a or Cat7 cables—up to 30 meters.
2.Universal Plug-and-Play Compatibility
Works seamlessly as a replacement transceiver for Cisco, for Fortinet, for Ubiquiti, for Netgear, for D-Link, for Broadcom, for Meraki, for Norkia, for Supermicro, for Mikrotik, for F5, for QNAP, for Intel, for Dell, for HPE Aruba, for TP-Link and most open SFP+ switches. No coding, no firmware—just insert and connect.
3.Engineered for Reliability & Low EMI
Shielded RJ45 port minimizes electromagnetic interference
Die-cast zinc housing ensures superior heat dissipation
Gold-plated contacts enhance durability and signal integrity
Low-power design (<2.5W @ 30m) reduces thermal load
Important Usage Notes and Safety Guidelines
To ensure optimal performance and extended service life of your 10G SFP+ to RJ45 copper cable transceiver, please observe the following guidelines:
1. Electrostatic discharge (ESD) protection during handling
Avoid direct contact with gold contacts or RJ45 pins when handling the module to prevent ESD damage.
2. Use exclusively with compatible SFP+ ports
This module is a 10GBASE-T SFP+ copper transceiver designed for 1.25/2.5/5/10G Ethernet transmission. Never insert into fibre SFP ports, legacy 1G SFP slots, or non-SFP+ chassis – mismatched use may damage the port or module.
3. Use high-quality shielded cabling
Only Cat6a or Cat7 cabling supports full-speed 10G transmission within 30 metres. Unshielded, substandard, or damaged cables may cause link instability, high latency, or auto-negotiation failure.
4. Normal operating temperature
Modules may generate heat during 10G operation—this is normal for 10GBASE-T signal processing (maximum power consumption 2.5W). Provided the switch has adequate airflow and ambient temperatures remain between 0°C and 70°C, such heating constitutes normal operation rather than a fault.
5. Avoid Dust and Moisture
Keep RJ45 ports clean and properly protected when not in use. Dust, moisture, or corrosion on connectors may degrade signal integrity.
Upgrade your network with a trusted, compatible, and future-ready SFP+ optical module. Enjoy reliable 1.25/2.5/5/10G-T fibre connectivity!
Whether you require server transceivers, network modules, or transceivers for technical upgrades/repairs—this SFP+ RJ45-10G-30M transceiver delivers professional-grade performance.
Why Choose This 10GBASE-T SFP+ Module?
1.True 1.25/2.5/5/10G-T Copper Connectivity in an SFP+ Form Factor
This hot-pluggable SFP+ transceiver delivers full 10 Gigabit Ethernet over standard Cat6a or Cat7 cables—up to 30 meters.
2.Universal Plug-and-Play Compatibility
Works seamlessly as a replacement transceiver for Cisco, for Fortinet, for Ubiquiti, for Netgear, for D-Link, for Broadcom, for Meraki, for Norkia, for Supermicro, for Mikrotik, for F5, for QNAP, for Intel, for Dell, for HPE Aruba, for TP-Link and most open SFP+ switches. No coding, no firmware—just insert and connect.
3.Engineered for Reliability & Low EMI
Shielded RJ45 port minimizes electromagnetic interference
Die-cast zinc housing ensures superior heat dissipation
Gold-plated contacts enhance durability and signal integrity
Low-power design (<2.5W @ 30m) reduces thermal load
Important Usage Notes and Safety Guidelines
To ensure optimal performance and extended service life of your 10G SFP+ to RJ45 copper cable transceiver, please observe the following guidelines:
1. Electrostatic discharge (ESD) protection during handling
Avoid direct contact with gold contacts or RJ45 pins when handling the module to prevent ESD damage.
2. Use exclusively with compatible SFP+ ports
This module is a 10GBASE-T SFP+ copper transceiver designed for 1.25/2.5/5/10G Ethernet transmission. Never insert into fibre SFP ports, legacy 1G SFP slots, or non-SFP+ chassis – mismatched use may damage the port or module.
3. Use high-quality shielded cabling
Only Cat6a or Cat7 cabling supports full-speed 10G transmission within 30 metres. Unshielded, substandard, or damaged cables may cause link instability, high latency, or auto-negotiation failure.
4. Normal operating temperature
Modules may generate heat during 10G operation—this is normal for 10GBASE-T signal processing (maximum power consumption 2.5W). Provided the switch has adequate airflow and ambient temperatures remain between 0°C and 70°C, such heating constitutes normal operation rather than a fault.
5. Avoid Dust and Moisture
Keep RJ45 ports clean and properly protected when not in use. Dust, moisture, or corrosion on connectors may degrade signal integrity.