Meet Your Seller
AJMRTC 3Pcs SN65HVD230 CAN Bus Transceiver Module, 3.3V CAN Communication Breakout Board with Slope Control, Thermal Shutdown Protection for STM32 Arduino Industrial DIY
- 1. Built with SN65HVD230 CAN transceiver chip, supports CAN communication up to 1Mbps at 3.3V logic level
- 2. Adjustable slope control via RS pin, reduce EMI noise for long-distance CAN cable transmission
- 3. Integrated thermal shutdown, bus short-circuit and ESD protection for stable operation in harsh environment
- 4. Differential CANH / CANL bus interface, wide common-mode voltage range, strong anti-interference ability
- 5. Pre-soldered pin header, simple wiring to connect CAN controller and CAN bus network
Any questions? Ask CelesteSM will help you find out quickly.
AJMRTC SN65HVD230 breakout board is a 3.3V CAN bus physical layer transceiver module, used to convert MCU single-ended logic signal into differential CAN bus signal. It works with STM32, Arduino and other controllers with CAN peripheral to build CAN communication networks. The RS pin supports three working modes: high-speed mode, slope-adjustable mode and low-power standby listen-only mode. Slope control slows signal edge rate to cut electromagnetic interference, which is ideal for long wiring in industrial projects. It has built-in thermal shutdown protection; when the chip overheats, the transmitter shuts down automatically to avoid permanent damage. The module also provides bus fault protection and receiver fail-safe function, ensuring stable logic output when the bus is open. The CANH and CANL differential bus supports ±25V transient tolerance and wide -2V ~ +7V common-mode range, suitable for factory automation, robot control, vehicle electronic experiment and remote data transmission. This pack contains 3 modules for multi-node CAN network testing and spare backup.
Specifications
Brand: AJMRTC
Chip Model: SN65HVD230
Supply Voltage: DC 3.3V
Communication Speed: Up to 1 Mbps
Function: CAN Bus Transceiver, Differential Signal Conversion
Control Pin: RS pin for slope control / high speed / standby mode
Protection: Thermal Shutdown, ESD, Bus Short Circuit Protection
Common-Mode Bus Range: -2V ~ +7V
Bus Transient Withstand: ±25V
Logic Level: 3.3V, not 5V tolerant
Interface: VCC, GND, TXD, RXD, CANH, CANL, RS
Compatible Controller: STM32, Arduino, ESP32 with CAN peripheral
Application: Industrial Control, Robot, Automotive Electronic Experiment, CAN Network DIY Project
Package Quantity: 3 Pcs
Feature: Low EMI, Strong Anti-interference, Fail-Safe Receiver, Breadboard Friendly
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by ConnectFlow USA Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory











